LumberJocks Woodworking Forum banner

20 inch Disc Sander

2K views 9 replies 7 participants last post by  AHuxley 
#1 · (Edited by Moderator)
Okay my fellow woodworkers.
Who makes a 2 HP- 20 inch disc sander, Single Phase, and the table will go below the disc. And who may have one for sale. Thanks…..
 
#8 ·
What lathe do you have? You could always make your own faceplate sanding disc… for either the inboard or outboard side. Pretty simple build. If you felt like getting creative, several people have made disc sanders from old treadmill motors, which are typically 1.5-2.5hp and would be variable speed. Usually you can find them all over the place for free or very little cash. Just some other options to consider :)

Cheers,
Brad
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top