Ryobi Miter Fence

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Gene posted 10-19-2010 04:11 AM 1180 views 0 times favorited 1 reply Add to Favorites Watch
View Gene's profile


1 post in 2746 days

10-19-2010 04:11 AM

Topic tags/keywords: miter saw fence

Hello, I am seeking information on a Ryobi TS1341 Miter Fence. The saw is only about a year old and the cuts are great but not at 90 degrees unless I cut a long piece. I used a large square and found that the center of both side of the miter fence on the inside (center) are note square, but rather angled in. From end to end, the fence is square. Is this how all miter fences are? If I try to make a short cut off of an end of a piece of wood and hold the piece to the fence, the cut will not be square. Thanks in advance.

1 reply so far

View Mark Shymanski's profile

Mark Shymanski

5621 posts in 3682 days

#1 posted 11-11-2010 03:35 PM

Have you checked out the Ryobi web site? Your fence should be square the whole way, not angled in. If this is a manufacturing defect it should be covered under warranty. I’d contact your vendor.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics