LumberJocks

roulette wheel project...i need advice

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by Mark posted 10-12-2010 02:53 AM 1407 views 0 times favorited 5 replies Add to Favorites Watch
View Mark's profile

Mark

1801 posts in 3055 days


10-12-2010 02:53 AM

Topic tags/keywords: question

Okay starting like this… My wife and I went on a double date with good friends of ours. We went for a night out at the casino (Caesars Windsor). We started off at the buffet, which is a Godsend. No food better than that! And after a few plates and a couple plates for the dessert bar, we decided to roll ourselves out onto the game floor. We played a few games here and there but then came the roulette table. We got hooked! We made good dough on her. So now we made a plan that once/month we would double date again to the same place. Until then we want to practice our roulette. now we need a roulette table and wheel. I want to know if anyone knows a thing or two about the roulette wheel that I must know before I whip one up. Thx.

-- M.K.


5 replies so far

View patron's profile

patron

13578 posts in 3123 days


#1 posted 10-12-2010 03:06 AM

leave some money at home

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Rick  Dennington's profile

Rick Dennington

5534 posts in 2976 days


#2 posted 10-12-2010 03:14 AM

Mark, GOOD LUCK, DUDE…..YOU MIGHT AS WELL TRY TO STEAL ONE AS TO BUILD ONE…IMPOSSIBLE..

-- My grandpa used to say: "Y'all come back when you can....come after dinner, and leave before supper.."

View bent's profile

bent

311 posts in 3450 days


#3 posted 10-12-2010 03:19 AM

i saw a show once about how gaming equipment is made/tested. casino wheels are built to extremely tight tolerances for balance and spacing. any variance takes some of the randomness out of it’s operation and that’s bad for the casino. no offense, but i think you’d have a tough time building one to actual gaming commission specs. you’d probably be better off practicing on a computer. no wait, your best bet is to quit now while you’re ahead.

View Mark's profile

Mark

1801 posts in 3055 days


#4 posted 10-12-2010 03:25 AM

lol…okay…thats what i was thinking too…enough said lol

-- M.K.

View InkJetSuperstore's profile

InkJetSuperstore

7 posts in 394 days


#5 posted 02-20-2017 05:36 PM

I just need to share what i have purchased last two weeks ago, and since I’ll be coming back to update this as the project moves along the, it didn’t quite fit in the low-content thread on the other hand. Hoewver It’d be similarly mostly ignored in Other Games as well so i can provide the ph0tos.คาสิโนออนไลน์ It happened that the previous owner used wood fill putty, tape(!) and then laid over faux-wood patching tape in the inside rim (not shown) to cover the gaps.
As not a master woodworker myself, I can’t comment as to how good an idea wood bondo is , and lacking a very expensive restoration, it might be the fastest route to a working wheel…

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com