LumberJocks

3 and 4 mm Plywood

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by robscastle posted 03-08-2017 11:10 AM 571 views 0 times favorited 8 replies Add to Favorites Watch
View robscastle's profile

robscastle

4507 posts in 2040 days


03-08-2017 11:10 AM

Do you have a need for some good quality plywood ?

I have about 40 sheets of three and four mm plywood

Its all interior marine grade G1S and S1S the Mill number is on every sheet.

no rubbish, apart from some damage through moving it about all the time

The sheets vary around 2.1 m and 1.6m x 900mm

There is also a few sheets of poly ply in various patterns.

Then there are a few veneer faced sheets

If they are of interest or even a smaller craft size pieces I can cut on site

send me a PM to discuss.

-- Regards Robert


8 replies so far

View JoeinGa's profile

JoeinGa

7721 posts in 1843 days


#1 posted 03-08-2017 01:51 PM

Well Rob, as much as I’d love to take you up on your offer, I fear the freight charges from Australia to the USA would eat me up!

But hey, way to go on offering to share your bounty ! Good for you!

-- Perform A Random Act Of Kindness Today ... Pay It Forward

View CFrye's profile

CFrye

9842 posts in 1675 days


#2 posted 03-08-2017 02:06 PM

Score, Rob!! Too far for me, also.

-- God bless, Candy

View crowie's profile

crowie

2035 posts in 1787 days


#3 posted 03-08-2017 08:07 PM

Rob, They’d be good for scrollsaw projects….
The Redcliffe Woodwork Guild does scrollsaw works and they sell the goods, donating the funds to the local hospital…just a thought if you have trouble storing it or using it all up…

-- Lifes good, Enjoy each new day...... Cheers from "On Top DownUnder" Crowie

View robscastle's profile

robscastle

4507 posts in 2040 days


#4 posted 03-08-2017 08:22 PM

Thanks for looking fellow LJs

I have had it there for a while Oct 2016.
My son and I bought it as a lot thinking it was all 12mm or larger but as it was under a house and dark the 3 & 4 neatly stacked sheets looked the be sheets thicker and have tried to sell it via ebay and gumtree but not much interest.
I would have thought the Poly Ply alone was something of interest to Caravan and RV builders but it was not to be so.

I can post you some sheets but you may need to get bigger letter boxes (tee hee)

I will give the Redvliffe Woodworkers a call today.

-- Regards Robert

View Joe Lyddon's profile

Joe Lyddon

9979 posts in 3888 days


#5 posted 03-11-2017 10:25 PM

Darn… too far from me too… :(

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View runswithscissors's profile

runswithscissors

2562 posts in 1861 days


#6 posted 03-12-2017 04:06 AM

Build a small boat or a kayak.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View robscastle's profile

robscastle

4507 posts in 2040 days


#7 posted 03-12-2017 05:25 AM

I could build a canoe and do a short paddle to show you but its all interior plywood it may start leaking as I enter the Strait of Juan de Fuca and have to be rescued by you !

-- Regards Robert

View robscastle's profile

robscastle

4507 posts in 2040 days


#8 posted 03-12-2017 05:26 AM

Otherwise guys, come on build a bigger letter boxes and I will post it to you!!

-- Regards Robert

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com