LumberJocks

raised panel cabinet doors

  • Advertise with us

« back to Joinery forum

Forum topic by stripit posted 03-07-2017 10:04 PM 620 views 0 times favorited 6 replies Add to Favorites Watch
View stripit's profile

stripit

21 posts in 1881 days


03-07-2017 10:04 PM

Topic tags/keywords: doors raised panel kitchen

Hi. I need to make 4 rasied panel doors for the base unit for shelves in our new kitchen. I’m looking for a router bit set, (3 piece) to make them witth. the panels we have are 5/8” thick and have a 1” bevel showing. All the sets I have seen are ogee or somthing like that not a bevel, and are for 3/4” thick wood. Any suggestions would be most welcome.

Thanks Joel


6 replies so far

View scribble's profile

scribble

146 posts in 2038 days


#1 posted 03-07-2017 10:08 PM

I believe you may find what you are looking for at precision bits. I have not tried there bits yet but they do have a lot of different designs.

-- If you can't read it Scribble wrote it!! “Experience is merely the name men gave to their mistakes.”

View TungOil's profile

TungOil

747 posts in 333 days


#2 posted 03-07-2017 10:21 PM

I believe the MLCS bits will work with 5/8” or 3/4” panels.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"

View pontic's profile

pontic

503 posts in 446 days


#3 posted 03-07-2017 10:39 PM

Yes either source is good and will get you what you need.

-- Illigitimii non carburundum sum

View jerryminer's profile

jerryminer

805 posts in 1279 days


#4 posted 03-09-2017 12:05 AM

Something like the Infinity 90-502?

-- Jerry, making sawdust professionally since 1976

View jerryminer's profile

jerryminer

805 posts in 1279 days


#5 posted 03-09-2017 12:26 AM

Or… if you want a simple bevel profile, you can cut that on the table saw with a tall fence.

-- Jerry, making sawdust professionally since 1976

View Madmark2's profile

Madmark2

373 posts in 426 days


#6 posted 03-09-2017 12:27 AM

Any panel raising bit can be used for either 5/8” or 3/4” as you are routing face side down.

The rail and stile bits are a bit fussier and generally set to 3/4”.

M

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com