LumberJocks

sanding belt

  • Advertise with us

« back to Woodturning forum

Forum topic by Karda posted 03-05-2017 11:07 PM 348 views 0 times favorited 4 replies Add to Favorites Watch
View Karda's profile

Karda

807 posts in 388 days


03-05-2017 11:07 PM

I got a 120 grit belt for my sander to sharpen my turning tools. I got a ceramic one with that work work or do i need a different kind thanks Mike


4 replies so far

View papadan's profile

papadan

3584 posts in 3203 days


#1 posted 03-06-2017 01:22 AM

Be careful not to take off too much material when sharpening. I use a 220 grit and a very light touch just to change the angle of the tip.

View Karda's profile

Karda

807 posts in 388 days


#2 posted 03-06-2017 02:01 AM

ok so far 120 is the finest I can find

View MrUnix's profile (online now)

MrUnix

5988 posts in 2034 days


#3 posted 03-06-2017 02:04 AM

120 is what I got on mine…. works just fine and I doubt I would want to go any finer.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View Karda's profile

Karda

807 posts in 388 days


#4 posted 03-06-2017 03:56 AM

ok thanks at least that has gone right, went to change the belt and one of the screws holding a little plastic cap won’t come out. It like it was put on with an air gun set on hjgh

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com