double sided tape?

« back to Power Tools, Hardware and Accessories forum

94 posts in 1306 days

970 days ago

I have the wixey digital readout for my table saw. I really like their products. last week i brushed the track and pulled off a piece of the green sensor is there anything out there other than double sided tape that i could use to reattach the sensor strip to its track?

I also want to thank all the lumberjocks out there that keep answering my questions.

Jim .k

4 replies so far

Gregn home \| projects \| blog 1643 posts in 1152 days #1 posted 970 days ago	CVA Glue? Only need a drop at each end. -- I don't make mistakes, I have great learning lessons, Greg
Jim K home \| projects \| blog 94 posts in 1306 days #2 posted 967 days ago	hey Gregn Do you mean super glue?
Gregn home \| projects \| blog 1643 posts in 1152 days #3 posted 967 days ago	Yes. -- I don't make mistakes, I have great learning lessons, Greg
Jim K home \| projects \| blog 94 posts in 1306 days #4 posted 945 days ago	Hi Has anyone ever used this stuff called Plumbers Goop? I cleaned the senor track and the rail used a thin coat of goop. I had to sand some squeeze out off the sensor rail works perfectly now. Jim

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8792
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	222
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	80
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1532
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3548
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15781
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2034
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	495
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2840
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	809
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	901
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6158

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
Coffee Table	dartzt	3 minutes ago	by joseph000	sign in to get readership tracking
From a 200 year old ruin to a workshop, a 3 year journey... #10: Building up side down.	Serradura	6 minutes ago		sign in to get readership tracking
Off-topic content. Click to see the post.	AngieO	10 minutes ago	by joein10asee	sign in to get readership tracking
FancyCloth's Profile	FancyCloth	11 minutes ago		sign in to get readership tracking
Inspired Plywood Vase	doubleDD	12 minutes ago	by Knothead62	sign in to get readership tracking
DoveTail Boxes	robscastle	16 minutes ago		sign in to get readership tracking
need help w/breaker for table saw	DonEC	19 minutes ago	by Shawn Masterson	sign in to get readership tracking
i need to run a 220 volt outlet for a table saw, how do i put in the outlet?	michaelsgarage	20 minutes ago	by RRBOU	sign in to get readership tracking
Jessicard's Profile	Jessicard	21 minutes ago		sign in to get readership tracking
Rock-n H Woodshop podcast #2: Episode 3	Drew	22 minutes ago	by joein10asee	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

Coffee Table

dartzt

3 minutes ago

by joseph000

to get readership tracking

From a 200 year old ruin to a workshop, a 3 year journey... #10: Building up side down.

Serradura

6 minutes ago

to get readership tracking

Off-topic content. Click to see the post.

AngieO

10 minutes ago

by joein10asee

to get readership tracking

FancyCloth's Profile

FancyCloth

11 minutes ago

to get readership tracking

Inspired Plywood Vase

doubleDD

12 minutes ago

by Knothead62

to get readership tracking

DoveTail Boxes

robscastle

16 minutes ago

to get readership tracking

need help w/breaker for table saw

DonEC

19 minutes ago

by Shawn Masterson

to get readership tracking

i need to run a 220 volt outlet for a table saw, how do i put in the outlet?

michaelsgarage

20 minutes ago

by RRBOU

to get readership tracking

Jessicard's Profile

Jessicard

21 minutes ago

to get readership tracking

Rock-n H Woodshop podcast #2: Episode 3

Drew

22 minutes ago

by joein10asee

to get readership tracking

double sided tape?

4 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...