LumberJocks

Rikon 70-050VS Lathe - scroll chuck upgrade

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by NoviceWoodworker posted 02-14-2017 10:43 PM 283 views 0 times favorited 2 replies Add to Favorites Watch
View NoviceWoodworker's profile

NoviceWoodworker

17 posts in 2199 days


02-14-2017 10:43 PM

Topic tags/keywords: question

Does anyone know if / where i can obtain a 4 jaw scroll chuck for my Rikon 70-050VS lathe. I saw a project that I would like to do and the article says I need a 4 jaw scroll chuck to hold the stock. I’ve done some looking and most that I’ve seen are for specific lathes (i.e. Grizzly, etc.) Any help on this is appreciated. Thank you.


2 replies so far

View MrUnix's profile

MrUnix

5980 posts in 2033 days


#1 posted 02-14-2017 11:08 PM

That lathe uses a pretty standard 1”x8tpi threaded spindle, so any chuck that will work with 1”x8tpi is what you want. There are very few ‘lathe specific’ chucks out there. BTW, the Baracuda 2 chuck is on sale now for $139 for the set (chuck + 4 jaw sets). There are plenty others out there as well, just take your pick.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable

View moke's profile

moke

1033 posts in 2611 days


#2 posted 02-15-2017 06:03 PM

That’s a good price on a chuck! You might check out Hurricane products too, they are usually very reasonable…
Mike

-- Mike

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com