LumberJocks

where can I find: Stanley Trim Router Motor Brushes

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Bren posted 2370 days ago 4313 views 1 time favorited 12 replies Add to Favorites Watch
View Bren's profile

Bren

35 posts in 2471 days


2370 days ago

Topic tags/keywords: router

I have an old Stanley trim router. One of the spring loaded brushes is shot. Does anyone know where I might try to find parts for this? It says 90084 Motor on it along with the following information: Model .01; 5 amps; 120 volts; 30,000rpm

-- Bren Hartman, Battle Creek, Michigan


12 replies so far

View Bren's profile

Bren

35 posts in 2471 days


#1 posted 2368 days ago

Where do you go for power tool service parts?

-- Bren Hartman, Battle Creek, Michigan

View motthunter's profile

motthunter

2141 posts in 2395 days


#2 posted 2368 days ago

I didn’t know that they made a router. Almost any good service center for power tools and elecgtric motors should have a variety to choose from

-- making sawdust....

View Thos. Angle's profile

Thos. Angle

4435 posts in 2559 days


#3 posted 2368 days ago

Try Stanley on the internet. They have a website. stanleytools.com I think.

-- Thos. Angle, Jordan Valley, Oregon

View Dadoo's profile

Dadoo

1763 posts in 2587 days


#4 posted 2368 days ago

Try Acetoolrepair.com and toolpartsdirect.com.

It’s been good to me.

-- Bob Vila would be so proud of you!

View Lmagee's profile

Lmagee

6 posts in 1213 days


#5 posted 1213 days ago

Hey Bren, saw your question about your router. I have my grandfathers stanley trim router. I need a new armature for it. Did you ever find parts for the stanley trim router? Where can I get parts? Thanks!

-- Landon, Choctaw OK.

View Bren's profile

Bren

35 posts in 2471 days


#6 posted 1212 days ago

Never did find parts for it. Is yours the same as mine? Maybe one of us should sell to the other for parts?

-- Bren Hartman, Battle Creek, Michigan

View Lmagee's profile

Lmagee

6 posts in 1213 days


#7 posted 1209 days ago

Well, the only kicker is that this router was my grandfathers and that is why I am trying to fix it. If you dont have any ties to yours I would be interested in purchasing it. Otherwise I may keep looking on internet. Thanks for the response. I didnt realize how hard it would be to locate a similar router. Thanks again.

-- Landon, Choctaw OK.

View hjt's profile

hjt

773 posts in 1734 days


#8 posted 1051 days ago

I have an old Stanley H-39-B Router. Was my dad’s and the brushes just gave out. I too am looking for parts.

-- Harold

View fussy's profile

fussy

980 posts in 1647 days


#9 posted 1051 days ago

Try eurtoneelectric.com. If they don’t have it, they don’t have it. Lots of brushes. Look at your to see the size, shunt or no shunt, cap style, etc. Enough info on site I could figure out what I need.

Steve

-- Steve in KY. 44 years so far with my lovely bride. Think I'll keep her.

View hjt's profile

hjt

773 posts in 1734 days


#10 posted 1051 days ago

Steve – thanks for the tip, I’ll check it out. I did a quick “fly by” of the site and found the link you gave was close, but misspelled. Here’s the correct link, Eurton Electric

I wonder how old this router is, when it was made? I”ve done some internet searches, but only found a reference to a 1954 Popular Mechanics that should an ad for an earlier model – the H15.

BTW – 43 years of marriage, can’t beat that with a stick! Honestly – congrats! I had 19 years with the first and soon 5 with my second model.

-- Harold

View fussy's profile

fussy

980 posts in 1647 days


#11 posted 1050 days ago

Harold,

Sorry about that. I tend to do that with a’s also. Glad you were able to find it. Hope you can get brushes for it. If not, don’t throw it away. Put it someplace special. Besides the memories, those oldies arre works of art.

Steve

-- Steve in KY. 44 years so far with my lovely bride. Think I'll keep her.

View GenealogyPaul's profile

GenealogyPaul

1 post in 844 days


#12 posted 844 days ago

My father-in-law was a backyard mechanic. He thought me brushes are just carbon and buy as close to size as you can and trim to fit with a knife it really sounds crude but it worked for me on something else. I am going to find some brushes for my router it quit on my son he thinks he broke it.

-- Paul, Washington, genealogist, woodworker, and gardener

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase