LumberJocks

glueing sandpaper

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by mbendel posted 09-13-2010 07:58 AM 746 views 0 times favorited 3 replies Add to Favorites Watch
View mbendel's profile

mbendel

2 posts in 2280 days


09-13-2010 07:58 AM

Topic tags/keywords: question sanding

Hey
I build bamboo fly rods and need to find a glue to adhere sandpaper to aluminum disks of a roughing mill spinning 12,000 on a router. Epoxy and contact cement fail, CA glue works ok. Any suggestions?


3 replies so far

View wysong's profile

wysong

17 posts in 2289 days


#1 posted 09-13-2010 08:24 AM

Contact cement
but your speed sounds to fast to sand anything though

-- Hutch

View mbendel's profile

mbendel

2 posts in 2280 days


#2 posted 09-13-2010 08:32 AM

I should follow up and add that the 36/50 grit is really cutting the strips into rough 60 degree triangles.

View David Kirtley's profile

David Kirtley

1286 posts in 2465 days


#3 posted 09-13-2010 03:13 PM

I would go with the pre-made diamond or carbide disks. You can pick up the small ones for a rotary tool or big ones that they use on angle grinders. You would go through the sandpaper too fast at those speeds.

-- Woodworking shouldn't cost a fortune: http://lowbudgetwoodworker.blogspot.com/

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com