LumberJocks

Jobsite Table Saw

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by stshy posted 01-20-2017 09:15 PM 578 views 0 times favorited 7 replies Add to Favorites Watch
View stshy's profile

stshy

1 post in 397 days


01-20-2017 09:15 PM

I was thinking of buying a table saw but am thorn between two. The dewalt DWE7480 at 400$ and the King Canada KC5100C at 319$. The dewalt is smaller and lighter and I have seen good reviews. The king canada I have not seen very reviews if any. Does anyone have the King Canada saw and recommend it? Thanks


7 replies so far

View Mark Shymanski's profile

Mark Shymanski

5621 posts in 3618 days


#1 posted 01-26-2017 01:49 AM

I have a King drill press bought many, many years ago (late last century 80s ish) and it is going as well as the day it was brought to the shop. Don’t undervalue a bigger table top as it can make working so much easier. Space in front of the blade and to either side is valuable real estate!

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View Lt_scout's profile

Lt_scout

37 posts in 476 days


#2 posted 01-26-2017 06:47 AM

I’m with Mark, I realize now the many shortfalls of a jobsite saw vs (any table saw) It mostly comes down to table surface space. Fence accuracy, smoothness of tilt/lift controls, cast iron top etc is bonus stuff.

-- When you know you can do more with less, you will require less to do more.

View ihadmail's profile

ihadmail

61 posts in 419 days


#3 posted 01-26-2017 07:25 AM

I have a Dewalt 7491RS and for the most part love it. The only real complaint I have about the saw is the limited space in front of the blade for making cross cuts.

Sorry I can’t comment on the King Canada brand though.

View rwe2156's profile

rwe2156

2799 posts in 1386 days


#4 posted 01-26-2017 03:26 PM

Truthfully a JS saw is a table saw in name only. You may have extreme space limitations you don’t say, but depending on what level of ww’ing you plan to do, something like dados not very feasible on a JS saw.

That being said, I’ve seen people build them into a large table and make a DIY fence that might get you by for a while.

For similar money I suggest looking for a used contractor saw with an induction motor on it.

-- Everything is a prototype thats why its one of a kind!!

View RogR's profile

RogR

109 posts in 771 days


#5 posted 01-27-2017 01:38 AM



For similar money I suggest looking for a used contractor saw with an induction motor on it.

- rwe2156

This is good advice. I have an older Dewalt JS saw and its a tough and light kickass saw for the jobsite but I wouldn’t want to actually “make” anything with it. I upgraded from a contractor saw to a cabinet saw and the former was streets ahead of a JS saw.

View Gadabout55's profile

Gadabout55

27 posts in 1816 days


#6 posted 01-27-2017 02:25 AM

I’ve had a DeWalt 745 for about 6 years and it has worked very well for me. I don’t have room for anything bigger, so it was either a jobsite saw or nothing. Definitely was the right choice for my situation. Can’t use a dado stack, but that’s ok by me.

View MT_Stringer's profile

MT_Stringer

3153 posts in 3137 days


#7 posted 01-27-2017 02:42 AM

I have the little DeWalt. So far, it has performed as needed. The table is not very big so some outfeed support would be a good idea if’n you are ripping material.

I like the rack and pinion fence adjustment.
My Incra miter gauge fits the miter slot.
Good dust collection when hooked up to a shop vac.
Loud when compared to my cabinet saw. :-)

Note: The arbor is short so a dado stack wouldn’t work. I did manage to safely bolt on two 7 1/4 inch rip blades with a shim so I could cut some drawer bottoms. That worked great, but there just aren’t enough threads for anything else.

Overall, I like it.
Hope this helps.
Mike

Set up at job site

Big difference in size! :-)

—-Short arbor

—-Rip blades for cutting drawer bottom slot.

-- Handcrafted by Mike Henderson - Channelview, Texas

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com