LumberJocks

Aftermarket fence for Delta 36-725

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by apehl posted 01-16-2017 06:49 PM 2063 views 0 times favorited 5 replies Add to Favorites Watch
View apehl's profile

apehl

51 posts in 511 days


01-16-2017 06:49 PM

Topic tags/keywords: fence rail aftermarket table saw contractor saw delta 36-725 upgrade

I found a Delta 36-725 saw on craigslist that the owner said he recovered due to his salvage rights. It doesn’t come with the fence or throat place. Seeing as I can get the saw for under $200. I was curious what recommendations you might have for an upgraded fence system (either with a new 30” capacity rail or utilizing the current one). Ideally I Dont want to sped $300 or $400 on it but I don’t have any experience in this area. Thanks!


5 replies so far

View WhyMe's profile

WhyMe

909 posts in 1395 days


#1 posted 01-16-2017 07:09 PM

Below is the fence for the 36-5000 but will fit the 36-725. It is a one piece rail system vs. two piece rail that comes on the 36-725. I have not seen where you can just buy only the fence. I imagine just the replacement fence for the 36-725 through Delta, if it can be purchased, will cost as much of more than the complete system.

http://www.homedepot.com/p/Delta-Power-Equipment-30-in-T-Square-Fence-and-Rail-System-36-T30T3/205803795?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-AllProducts%7c&gclid=CMfq19mtx9ECFduCswodKFgGeA&gclsrc=aw.ds

View Rick_M's profile

Rick_M

10606 posts in 2214 days


#2 posted 01-16-2017 07:29 PM

Looks like a winner

-- http://thewoodknack.blogspot.com/

View SlickTX's profile

SlickTX

9 posts in 867 days


#3 posted 01-16-2017 07:35 PM

I upgraded the fence on my Delta 36-725 to the Incra LS-TS fence and couldn’t be happier.

View knotscott's profile

knotscott

7784 posts in 3209 days


#4 posted 01-16-2017 08:31 PM



Below is the fence for the 36-5000 but will fit the 36-725. It is a one piece rail system vs. two piece rail that comes on the 36-725. I have not seen where you can just buy only the fence. I imagine just the replacement fence for the 36-725 through Delta, if it can be purchased, will cost as much of more than the complete system.

http://www.homedepot.com/p/Delta-Power-Equipment-30-in-T-Square-Fence-and-Rail-System-36-T30T3/205803795?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-AllProducts%7c&gclid=CMfq19mtx9ECFduCswodKFgGeA&gclsrc=aw.ds

- WhyMe

Tough to beat the T3 for < $200…plus it should be a direct fit!

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View TWDuke's profile

TWDuke

9 posts in 697 days


#5 posted 03-03-2017 11:00 AM



I upgraded the fence on my Delta 36-725 to the Incra LS-TS fence and couldn t be happier.

- SlickTX

Good lord, a quick search suggested the Incra fence costs nearly as much as the saw’s list price. Is that right?

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com