LumberJocks

Need help with cabinet door hinges

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by jiminlosangeles posted 12-14-2016 10:45 PM 438 views 0 times favorited 3 replies Add to Favorites Watch
View jiminlosangeles's profile

jiminlosangeles

5 posts in 696 days


12-14-2016 10:45 PM

I’m in the process of building new cabinet doors for my kitchen. This is the first time I’ve done this.

When I cut my doors, I made them a little oversized and then trimmed them down to the size I thought they should be. Turns out, I made a bit of a mistake and I now have around a 1/8 inch overlap on the two doors when they are hung. The doors came out great and so I’d like to salvage them. Fortunately, the cabinet I’m installing them on is a stand-alone so if there is a slight difference in the overlay, it shouldn’t be noticeable.

The hinges I’m using are Blum 3/4 inch overlay clip-on European style. Ideally, I’d like to find a 7/8 inch overlay hinge but I haven’t been able to find one. As an alternative, I could use a 1 inch overlay and shim it but again, I haven’t found a clip-on… only a one piece that mounts to the frame. I’d like to avoid that if I can.

Does anyone know where I can get either a 7/8 or a 1 inch overlay clip on hinge? Any help would be much appreciated. I know this was a rookie mistake.

Thanks in advance for the help.


3 replies so far

View runswithscissors's profile (online now)

runswithscissors

2781 posts in 2081 days


#1 posted 12-15-2016 12:19 AM

Rockler, maybe?

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View jbay's profile

jbay

2432 posts in 955 days


#2 posted 12-15-2016 01:16 AM

Blum has a clip top 110 deg + hinge that goes up to 22 mm

or you can check out the Compact 33’s or the Compact 39C’s

View jbay's profile

jbay

2432 posts in 955 days


#3 posted 12-15-2016 03:06 AM

Sugatsune also looks like they have one that might work, depending if you already drilled your cup holes and where.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com