Band Saw will not stay put

You need to adjust the tracking on the top wheel. On the back of the case near the center of the upper wheel you will find an screw/wingnut. There will probably be a lock nut to keep it from rotating. You will
need to loosen that. Put the blade back on and turn it by hand. Turn the adjustment (Tracking screw)
probably clockwise since your bland is coming off. Keep turning the screw until the blade rides in the center
of the wheel. Then tighten the locking nut.

Hope this helps

-- Gary, East TX -- The longest journey begins with a single step.

There are tutorials on bandsaw tuning that should give you step by step instructions to solve your problem. A company named Carter is one source. Just google “carter band saw”.

-- Maplewood, MN

Try checking this tuning article.

-- -** You are never to old to set another goal or to dream a new dream ****************** Dick, & Barb Cain, Hibbing, MN. http://www.woodcarvingillustrated.com/gallery/member.php?uid=3627&protype=1

Thank you, guys.
This week I will work on it and let you know.
Since my dad died I have needed help and did not know where to turn
My dad and I have done many projects, but I have only done a few.
you’all are real bud’s.
Sylvann

-- Syl - Houston, TX - The first time is just practice. John 1:1-12

Sylvann, you have come to the right place. Welcome to lumberjocks.

-- "Bordnerizing" perfectly good lumber for over a decade.