LumberJocks

Locating rough cut lumber

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by JDCope posted 07-29-2010 02:07 AM 6665 views 0 times favorited 7 replies Add to Favorites Watch
View JDCope's profile

JDCope

1 post in 1581 days


07-29-2010 02:07 AM

Need help finding rough cut lumber in middle Tennessee. Any help would be great.


7 replies so far

View jusfine's profile

jusfine

2280 posts in 1648 days


#1 posted 07-29-2010 03:39 AM

I found a few places that had some nice stock when I was in Murfreesboro and Shelbyville area a couple months ago.

Best people to deal with were those at Summers Lumber and Timber Co.

Jesse Bolden was a great guide through their operation, and even gave me a few short figured pieces to bring home to Canada in my suitcase…

They are just off I-24 at LaVergne.
Address is 1515 J.P. Hennessy Drive
615-641-6190

www.summerslumber.com

Good luck!

-- Randy "You are judged as much by the questions you ask as the answers you give..."

View bandman's profile

bandman

79 posts in 2112 days


#2 posted 07-29-2010 04:54 AM

I’d recommend you look for a sawmill on the woodweb sawyers and dryers directory for your
area in tenesee, the address is www.woodweb.com, multiple mills should be listed for Tenesee
area.

-- Phil

View TheWoodsmith's profile

TheWoodsmith

108 posts in 1642 days


#3 posted 07-29-2010 05:18 AM

I found my sawmill through a craigslist post under “material” The place was 45 minutes away but sweet deals. You might get lucky there.

-- I know its around here somewhere...

View PflugervilleSteve's profile

PflugervilleSteve

98 posts in 1764 days


#4 posted 07-29-2010 06:08 AM

If you’re willing to go down to the Chattanooga area, I just visited some folks you could talk to. They’ve got some nice white oak, some walnut, a tiny bit of cherry, a bit of sycamore, some cedar, and more. You can call Michelle at 423-503-6967.

Nice folks. I’ll be giving them thumbs up in my blog for this week’s trip.

View Sawmillnc's profile

Sawmillnc

150 posts in 1776 days


#5 posted 07-30-2010 04:17 AM

Scott Banbury is located in Memphis and has some really nice wood..

http://www.scottbanbury.com/aboutus.html

-- Kyle Edwards, http://www.sawmillnc.com, Iron Station , NC (near Charlotte)

View MercerRemodeling's profile

MercerRemodeling

47 posts in 2333 days


#6 posted 07-30-2010 04:44 AM

I live in Nashville and am always looking for sources. I have seen several different suppliers with ads on craigslist but have never purchased via that route. Here is a sawmill in South Nashville that I will be calling: http://nashville.craigslist.org/mat/1852878180.html
I would be interested in what you find.

View BobFlyer's profile

BobFlyer

7 posts in 1730 days


#7 posted 08-06-2010 05:05 PM

Spencer is located in middle of Tenn. In Spencer there is a State Park with waterfalls, I do not know the name of the park, however, there is a south entrance to the park, on the road with the south entrance about 5-6 miles south is a sawmill that cuts timber, plus they have a sawmill. Name of owner is Sullivan. I do not know the name of mill or exact address, but was a very nice individual. Perhaps this may lead to or you can find what you are looking for at his place. He indicated he had Oak, several species, butternut, hickory, pine walnut and others.

I have trouble finding products here in the south, Panama City, Fl

Regards Bobflyer

-- Bob, Panama City Beach, Florida

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase