Griz G0441 DC

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by DonJ posted 07-13-2010 10:23 PM 1661 views 0 times favorited 11 replies Add to Favorites Watch
View DonJ's profile


250 posts in 2948 days

07-13-2010 10:23 PM

The clear plastic bag at the bottom of the filter just sprung a leak; is there a quick replacement, or do I need to order from Griz? Thanks,

Don J

-- Don, San Antonio, TX

11 replies so far

View Steven H's profile

Steven H

1117 posts in 2480 days

#1 posted 07-13-2010 10:31 PM

When did you buy this?
Every grizzly machine has 1 year warranty.
They will replace any part.

Grizzly has great costumer service, one of my dust collector has the wrong clamp, so will sent a new one to me.

View HorizontalMike's profile


7064 posts in 2334 days

#2 posted 07-13-2010 10:32 PM

Why not try a 55gal. contractor garbage bag from HEB? If I am remembering correctly they are 3mil. thickness. I am looking at my HF 2hp DC unit and it looks like it would fit. I wouldn’t think a bit of fold/overlap of the bag would hurt. IMO, the only drawback is not being able to “see” the dust in the bag. Are you using a cyclone in front of the DC?

BTW, I’m just 26mi. north of 1604 so I guess we’re neighbors. 8-)

-- HorizontalMike -- "Woodpeckers understand..."

View TheWoodNerd's profile


288 posts in 2612 days

#3 posted 07-13-2010 11:07 PM

The G0441 is a 3hp cyclone. And yes, garbage bags work fine. Seeing probably isn’t a problem, as my original bag collected maybe a cup of dust during the 9 months before it also split.

-- The Wood Nerd --

View RedShirt013's profile


219 posts in 3082 days

#4 posted 07-13-2010 11:10 PM

I had the same thing happen to me and replaced with a heavy duty garbage bag. Fold the edge outward and staple it, then when you thread the metal band through it (like a belt for pants), it makes for much quicker sawdust dumping & replacement over the generic setup. If you’re worried about bag opening bigger than the DC ring just put a foam weatherstrip around the “clamping” area

-- Ed

View DonJ's profile


250 posts in 2948 days

#5 posted 07-13-2010 11:17 PM


My concern was that the pressure on the bag might rip through a garbage bag, but it sounds like the thicker ones handle it just fine. Thanks, as I’ll just put a garbage bag on it.

-- Don, San Antonio, TX

View dbhost's profile


5590 posts in 2652 days

#6 posted 07-13-2010 11:43 PM


Try Wynn Environmental. They sell packs of 4 mil clear poly bags for $13.00 / 10 pack.

-- My workshop blog can be found at

View Mark Shymanski's profile

Mark Shymanski

5300 posts in 3133 days

#7 posted 07-14-2010 12:36 AM

I hate to be the first to suggest it but “Duct Tape”!! Unless the bag is shredded duct tape on the inside should hold the bag together.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View Steven H's profile

Steven H

1117 posts in 2480 days

#8 posted 07-14-2010 04:07 AM

Why not get a heavy duty bag?

View ChunkyC's profile


856 posts in 2675 days

#9 posted 07-14-2010 04:28 AM

“a 55gal. contractor garbage bag from HEB?”

What’s HEB? Is that a local San Antonio thing or am I just being very thick tonight?

-- Chunk's Workshop pictures:

View vicrider's profile


179 posts in 2319 days

#10 posted 07-14-2010 08:04 AM

I’ve been using heavy duty garbage bags for 3 years on my 2hp Jet DC. haven’t ripped one yet. My usual problem is to forget to check the thing until it’s too full…....

-- vicrider

View dbhost's profile


5590 posts in 2652 days

#11 posted 07-14-2010 08:35 AM

HEB is a Texas grocery store chain… Dirt cheap, and at least the one in my neighborhood, the best darned cuts of meat you could ask for…

-- My workshop blog can be found at

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics