Help Jet JWTS 10 switch from 110 to 220

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by DaMuffinMan posted 10-30-2016 04:09 AM 506 views 0 times favorited 3 replies Add to Favorites Watch
View DaMuffinMan's profile


5 posts in 773 days

10-30-2016 04:09 AM

Greeting & salutations fellow dust makers.

I could really use some electrical help changing the wiring on my Jet JWTS10 from 110 to 220.
(I don’t want to debate 110 vs 220).

Enclosed are some pictures from the saw and the cord I bought to hook it up. Can I please get some help with how to hook this up?

OK so here is my dilemma, the 110 cord in the first picture

comes out of the motor and goes to the On off switch you can see it in the second picture.

And then it comes back and this is what plugs into the wall outlet Third picture.

A couple of questions. What type of power cord do I buy to hook this up to the 220 Volt outlet in the 4th picture?

A 3 or 4 wired power cord?

The breaker is a 30 amp breaker and is the only thing that will be on it.


3 replies so far

View Carloz's profile


1147 posts in 790 days

#1 posted 10-30-2016 05:07 AM

Page 37

But judging by the questions you ask I would very strongly suggest hiring someone who know what he is doing.

View MrUnix's profile


7040 posts in 2397 days

#2 posted 10-30-2016 05:17 AM

Outlet shown is a NEMA 14-30 normally used for a 30A dryer circuit, so you would need to get a matching 14-30 plug. The neutral is not used for 240v, just the two hots and a ground.


-- Brad in FL - In Dog I trust... everything else is questionable

View DaMuffinMan's profile


5 posts in 773 days

#3 posted 11-01-2016 07:18 PM

I got it fixed, thanks for the help.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics