How far off center is the hole in the...

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Loren posted 10-28-2016 05:19 PM 377 views 0 times favorited 2 replies Add to Favorites Watch
View Loren's profile


10477 posts in 3819 days

10-28-2016 05:19 PM

... round metal part of a Biesemeier fence cam clamp?

I have a vintage table saw with a sliding table so
I can’t use a standard fence. My options are to
either spend and arm and a leg or make my
own fence and I’m leaning towards the latter.

I can fuss around with wood to figure out the
offset of the pivot hole but I thought I would
ask first.

2 replies so far

View MrUnix's profile


7001 posts in 2370 days

#1 posted 10-28-2016 06:08 PM

I think you will need to fuss around with wood to figure it out anyway… since you are making the fence yourself and it most likely won’t be exactly the same as a Biesemeyer:

Distance from the edge of the hole to the widest outside part of the cam is ~0.60”, and at the narrowest is ~0.30”. That is from the commercial version (I have a BC50), so it probably will be different than what is on the homeshop version or the newer T2/T3’s.


-- Brad in FL - In Dog I trust... everything else is questionable

View Loren's profile


10477 posts in 3819 days

#2 posted 10-28-2016 06:18 PM

Perfect. Thank you.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics