LumberJocks

hitachi c10fl motor assembly question.

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by mahdee posted 10-25-2016 12:17 AM 326 views 0 times favorited 3 replies Add to Favorites Watch
View mahdee's profile

mahdee

3828 posts in 1602 days


10-25-2016 12:17 AM

Topic tags/keywords: question tablesaw

Hi,
I had a bearing go out on my motor and had to wait 3 weeks for it to arrive. Now that I have put back together, I can’t figure out how to install the heavy spring that connects to the motor base. There is a hole in the shaft where the motor base slides into and I am thinking the straight part of the spring goes into that hole; but how?? Any help is much appreciated.

-- earthartandfoods.com


3 replies so far

View HokieKen's profile

HokieKen

4510 posts in 973 days


#1 posted 10-25-2016 09:01 PM

I have that saw, I’ll try and check it out and take some pics. Not sure I’ll be able to tonight but if not, I’ll try tomorrow.

-- Kenny, SW VA, Go Hokies!!!

View mahdee's profile

mahdee

3828 posts in 1602 days


#2 posted 10-25-2016 11:56 PM

Kenny, thanks a lot. It was right in front of my face and I was thinking it must be much more complicated than that!
I should have taken some pictures of how I did it as there are absolutely no instructions anywhere on the web. Unfortunately, it started to make the same vibrating noise again except louder for a while and then it went away. Maybe I removed too much dust out of the motor?? Will see. If it continues, instead of paying $500 for a new motor, I may shop for another saw since the tilt on this saw is horrible. I think I payed $500 for it several years back.
Thanks again.

-- earthartandfoods.com

View HokieKen's profile

HokieKen

4510 posts in 973 days


#3 posted 10-26-2016 03:21 AM

LOL, I misread your model #. I have the c10fce which is a miter saw. I wouldn’t have been much help anyway!

-- Kenny, SW VA, Go Hokies!!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com