Anyone have a ideas for sawblade storage?

  • Advertise with us

« back to Coffee Lounge forum

Forum topic by jusfine posted 07-04-2010 04:57 AM 1740 views 0 times favorited 11 replies Add to Favorites Watch
View jusfine's profile


2422 posts in 2920 days

07-04-2010 04:57 AM

Topic tags/keywords: question

I have a number of 10” and 12” blades that I need to build storage for, what is your preferred method?

-- Randy "You are judged as much by the questions you ask as the answers you give..."

11 replies so far

View Steven H's profile

Steven H

1117 posts in 3054 days

#1 posted 07-04-2010 05:19 AM

Hang it with a peg, duct tape it to the wall, make a rack…

View richgreer's profile


4541 posts in 3068 days

#2 posted 07-04-2010 02:08 PM

I have a 1×10 oak board and I have mounted several pegs (dowels) into it at a slight upward angle. The board is attached to a wall.

-- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.

View Gene Howe's profile

Gene Howe

10477 posts in 3422 days

#3 posted 07-04-2010 03:03 PM

Similar to Rich’s idea, take a couple 2X6s and cut angled kerfs in them and mount them side by side on a wall.
Or, build a box with hard board “Shelves” that slide in kerfs in the sides of the box. Like a paper file holder….sorta.
That’s what I did for blades and sand paper.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View knotscott's profile


8006 posts in 3370 days

#4 posted 07-04-2010 05:17 PM

This one is easy and works well…prolly similar to what Gene described. They’re still exposed to dust though, and you have to be careful not to rub against it!

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View jusfine's profile


2422 posts in 2920 days

#5 posted 07-04-2010 06:03 PM

I have a plywood “rack” similar to the one in the photo above by knotscott, but I like the idea of simple drawers instead.

Thanks for the suggestions and links.

-- Randy "You are judged as much by the questions you ask as the answers you give..."

View stefang's profile


15881 posts in 3328 days

#6 posted 07-04-2010 07:41 PM

I like vertical or horizontal pigeon holes. Takes minimal space and protects against getting snagged by them.

-- Mike, an American living in Norway.

View WoodSawyer's profile


3 posts in 2374 days

#7 posted 11-20-2011 08:59 AM


View 404 - Not Found's profile

404 - Not Found

2544 posts in 2963 days

#8 posted 11-20-2011 02:26 PM

I keep them in their original cardboard sleeves stacked on top of each other. They don’t take up much room that way and you don’t have to mess around when you take them for sharpening.

View Bertha's profile


13525 posts in 2687 days

#9 posted 11-20-2011 08:10 PM

I don’t have much of a blade collection. If I have to change a blade, I’ll usually just find another way to make the cut. Does that make me weird? I hate changing blades. Or rather, I hate checking setups after I’ve changed blades. Don’t even get me started about bandsaw changes;)

-- My dad and I built a 65 chev pick up.I killed trannys in that thing for some reason-Hog

View jusfine's profile


2422 posts in 2920 days

#10 posted 11-20-2011 08:15 PM

Wow, I had forgotten I even posted this…504 days ago.

This is what I ended up with for my storage, incorporated into my outfeed table for my Unisaw.

See blog here.

-- Randy "You are judged as much by the questions you ask as the answers you give..."

View Jim Jakosh's profile

Jim Jakosh

20466 posts in 3099 days

#11 posted 11-21-2011 02:21 AM

I stack mine in the cabinet I built below my table saw. I put a round cardboard disc in between each one to protect the edges from hitting. I only have about 4 and don’t change them much. I don’t like leaving them out where I can bump into them They cut you pretty quickly just standing still!...........Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics