Who would you trade with?

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by kolwdwrkr posted 1511 days ago 1083 views 0 times favorited 15 replies Add to Favorites Watch
View kolwdwrkr's profile


2821 posts in 2214 days

1511 days ago

Topic tags/keywords: question

I was just curious as to who you would trade with if given a chance. There are a lot of great woodworkers here. I haven’t seen everyones work but I’ve got a small list. I would trade for one of Allisons intarsia projects, one of Dans tile and frames, one of Triferns Vessels, Any project by Odie, and a Lazy Larry from Degoose. I don’t need a cutting board Larry, but a lazy larry would be a great center piece just so you know. LOL. Trifern, I’ve got some favorites already chosen if you’re interested.
Dan, I prefer Mahogany over Oak, but oak is fine I suppose.
Allison, your work speaks volumes of your abilities and it would be neat if a piece was in my home. I’d have to see a brochure as to what is available. LOL. Do you take commissions on trade? hehe
Odie, your boxes and turnings are great. I’m stuck between a segmented turning or one of your nice boxes with the cool joinery.

I need to stop there because I don’t have that much stuff to trade. I’m sure my list could go on and on and on and on…............

-- ~ Inspiring those who inspire me ~

15 replies so far

View wseand's profile (online now)


2118 posts in 1666 days

#1 posted 1511 days ago

I will take one of everybody’s, and some fries to go..and I want that super sized.

-- Bill - "Freedom flies in your heart like an Eagle" Audie Murphy

View lagunabamboo's profile


28 posts in 1595 days

#2 posted 1511 days ago

I already have 2 storage units. Enough with the stuff ( LOL)

-- Laguna Bamboo

View Don's profile


506 posts in 1697 days

#3 posted 1511 days ago

Dennis Zongkers chess set or any of Andy’s boxes.

-- Don - I wood work if I could. Redmond WA.

View Jesse.R's profile


50 posts in 1549 days

#4 posted 1511 days ago

ill give you a half a snickers bar and 3 cheezy poofs for sandy!

-- jesse

View pommy's profile


1697 posts in 2315 days

#5 posted 1511 days ago

Anything from Dennis Zongkers workshop a true master craftsman and from GaryK the list can go on and on so many craftsman and woman on LJs

-- cut it saw it scrap it SKPE: ANDREW.CARTER69

View degoose's profile


6992 posts in 1979 days

#6 posted 1511 days ago

Nice to be included on your list… I am truly honoured..
As to who I would swap with… I dare not start for fear of insulting one or two if they were not on my list…
OK Just one… sorry everyone else.. Jordan.. his carving is so realistic…

-- Drink twice... and don't bother to cut... @ For lovers of all things timber...

View a1Jim's profile


112008 posts in 2201 days

#7 posted 1511 days ago

There are a number folks that i wish I was as talented as and there are way to many to list, but the group you named all would be included and high on the list but I would not be honest if I didn’t mention my friends Charles , David, Rob,Larry,James, Mike,Marc,Randy,Chuck,Tom,Bob,Gary and yes Keith but there are many many more.

-- Custom furniture

View Heidi Neely's profile

Heidi Neely

550 posts in 1798 days

#8 posted 1510 days ago

If given a chance, I’d trade in a heartbeat with Chessmkr for one of his amazing carved sets, for any of Jordan’s carvings, for one of Glynn’s turmed vessles (I’m very partial to the tree bowls), or for one of Zebrano’s projects with the beautiful inlay work. I can’t say it would be much of a fair trade for any of them though….I would definately come out ahead in any of those trades ; )

-- Heidi :) “The only source of knowledge is experience”

View MedicKen's profile


1599 posts in 2086 days

#9 posted 1510 days ago

Dilo Marcio Fernandino, to have one of his pieces in my home would be incredible. His work is magnificent and truly museum quality.

-- My job is to give my kids things to discuss with their

View CharlieM1958's profile


15683 posts in 2842 days

#10 posted 1510 days ago

I’d trade for one of Grizzman’s dresses in a heartbeat.

-- Charlie M. "Woodworking - patience = firewood"

View Gary's profile


7082 posts in 2057 days

#11 posted 1510 days ago

Anything that David (Patron) makes..

-- Gary, DeKalb Texas only 4 miles from the mill

View jusfine's profile


2280 posts in 1550 days

#12 posted 1510 days ago

Would trade almost anything I could make (or have) for one of the lacewood rocking chairs made by PaulfromActon!

-- Randy "You are judged as much by the questions you ask as the answers you give..."

View KMJohnson's profile


165 posts in 1645 days

#13 posted 1506 days ago

Charlie, sorry but grizzmans dresses are too big for you, but they would fit my “mature” stature. LOL

-- Let's do it in the wood pile!

View Bob Kollman's profile

Bob Kollman

1796 posts in 1815 days

#14 posted 1506 days ago

A-1 Jim wants to be like me????

Either a mis print or another Bob!!! :)

-- Bob Kenosha Wi.

View blackcherry's profile


3153 posts in 2447 days

#15 posted 1505 days ago

I trade with Larry for his timber and inspirational chair…lol

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase