LumberJocks

table saw & router table, question about router and saw distances

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by dedalo posted 06-26-2010 12:21 AM 889 views 0 times favorited 1 reply Add to Favorites Watch
View dedalo's profile

dedalo

173 posts in 2359 days


06-26-2010 12:21 AM

Topic tags/keywords: table saw question

Hi everyone! as you can see in my blog http://lumberjocks.com/dedalo/blog/16393 I’m planning a new table for my table saw + router (next I will build a workstation for them).

I have a fence, and the rails, the rails are 120cm (47,2 inches) long, and bought a 17” LS incra positioner.
In the manual says the positioner should be at 19” 3/4 from the base of the positioner to the center of the router bit (I’m asuming the same distance to the saw).

My question is about relative position between the saw and the router, I have mainly 2 options, one on each side or both in the center of the table.

I see that with both in the center I have some option of reching both with the positioner without taking it out (and changing side).

I feel the both in the center is more usefull but most of the workstations I see are different.

If I don’t explain myself (english as a second language) please tell me so and will create some pictures to explain the problem.

-- http://carpinteriaenargentina.blogspot.com


1 reply so far

View Mark Shymanski's profile

Mark Shymanski

5314 posts in 3174 days


#1 posted 07-23-2010 11:48 PM

Hmmm, pictures might help I don’t think I follow you as to what you are asking.

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com