Craftsman 113.22411 help

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Hammeredkills posted 08-24-2016 05:28 PM 221 views 0 times favorited 4 replies Add to Favorites Watch
View Hammeredkills's profile


3 posts in 62 days

08-24-2016 05:28 PM

Hello I have an old craftsman 113.22411 10” table saw that I am trying to put new life into. Ive been searching my model but seems like its either a rare model or a not a good model. I found posts on here about that model but not quite the info I was looking for. Is the abor shaft the same as other models? My blade wobbles when hand turning the blade. I couldnt find what size pullies and abor rpm the saw should run. New jets run 4000 rpm at the arbor, is that a normal speed or to fast for these old saws. I have new bearing ready to put in once I find a shaft or get mine trued up. Thanks for any help.

4 replies so far

View MrUnix's profile


4031 posts in 1620 days

#1 posted 08-24-2016 06:18 PM

Manual can be found here:


-- Brad in FL - To be old and wise, you must first be young and stupid

View Hammeredkills's profile


3 posts in 62 days

#2 posted 08-24-2016 06:41 PM

Thank you that helps out alot! Now I can dig threw other manuals and see what interchanges. Is this an odd model? Seems like there is alot of information on these old saws but this model number. Thanks again

View Richard's profile


1871 posts in 2112 days

#3 posted 08-24-2016 07:11 PM

If yours is the same as that picture , Yes it is a Very Old Model . Can’t be any help on more information though.

View Hammeredkills's profile


3 posts in 62 days

#4 posted 08-24-2016 08:12 PM

It does, thats ok any information I can get right now is extremely helpful. My dad wanted to sell it on craigslist for as much as he could get and go buy a cheap throw away portable contractor saw. I talked him out of it and investing in the one we have. I know he said it was old when he got it in the 70’s. So its getting to be old as dirt but the top is flat, not damaged its got a none stock motor one it in the 1hp range (have to look again to make sure).
Forgot to mention the current motors rpm is 3450.
Thanks for the information guys really appreciate it.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics