WTB Aromatic Red Cedar

« back to Woodworking Trade & Swap forum

49 posts in 1145 days

1083 days ago

I am looking for some Red Cedar to purchase. I need it to be somewhere close to 3/8” thick with a minimum of 4” wide and a minimum of 48” long. I don’t need a truckload of this, just a few pieces.

I live in Valdosta, GA and my zip code is 31602 so I will probably need it shipped to me.

I seen some on Woodcraft but they were not wide enough.

Thanks for your time.
Levi

6 replies so far

thatwoodworkingguy home \| projects \| blog 375 posts in 1097 days #1 posted 1083 days ago	woodfinder.com -- thatwoodworkingguy.com ~Eagle America~ ~Woodcraft~
a1Jim home \| projects \| blog 87032 posts in 1744 days #2 posted 1083 days ago	Why don’t you touch base with Grizzman http://lumberjocks.com/messages/new/grizzman -- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Michael Clark home \| projects \| blog 28 posts in 1491 days #3 posted 1083 days ago	It is a bit of a trek, but Peachstate Lumber has Red Cedar. -- Sometimes... At night... My router tells me to do things to wood. Bad Things.
gseymour home \| projects \| blog 1 post in 1083 days #4 posted 1083 days ago	Levi, I just returned from my father-in-law’s with about 100- bf of 1/2” aromatic cedar. The boards are about 6” wide and 6’ long. I’ll be happy to trim and ship part of these to you. How about $5.00 / bf? Tell me the sizes you need and I’ll trim them (over sized) to meet your needs. Gayle
Cozmo35 home \| projects \| blog 2138 posts in 1203 days #5 posted 1082 days ago	I’ve got “some” but I live near Dallas, TX -- If you don't work, you don't eat!.....Garland, TX
Sawmillnc home \| projects \| blog 150 posts in 1221 days #6 posted 1081 days ago	I have hundreds of feet available at 2.25/bf in widths of min 6” up to 14” wide and 8-10 feet long. I’m in NC so may be too far away for you. Thanks and happy cedar hunting. kyle -- Kyle Edwards, http://www.sawmillnc.com, Iron Station , NC (near Charlotte)

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8788
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	219
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	78
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1527
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3544
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15758
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2032
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	494
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2837
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	808
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	901
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2738
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6152

	Author	Latest activity		New comments or replies since you last checked
Bangle for my wife	ldl	4 minutes ago	by 49bill	sign in to get readership tracking
Blue Collar Woodworking #38: Upgrade your budget dust collection!	StumpyNubs	4 minutes ago	by Kreegan	sign in to get readership tracking
Does not do its only job!	Cole Tallerman	4 minutes ago	by poopiekat	sign in to get readership tracking
Turned Birds	SPalm	5 minutes ago	by hotrodadcox	sign in to get readership tracking
Work bench smack down	Newage Neanderthal	7 minutes ago	by chrisstef	sign in to get readership tracking
Unmotivated with small shop	agallant	8 minutes ago	by Dchip	sign in to get readership tracking
Craigslist posters have gone nuts.....	Bill White	9 minutes ago	by OnlyJustME	sign in to get readership tracking
Harmonograph	dartzt	10 minutes ago	by dartzt	sign in to get readership tracking
How long to air dry lumber that will be used outside!	Manley74	11 minutes ago	by OnlyJustME	sign in to get readership tracking
Bidding a project	krisrimes	11 minutes ago	by krisrimes	sign in to get readership tracking

WTB Aromatic Red Cedar

6 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...