LumberJocks

Millers Falls No 2-A eggbeater hand drill

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Frankie59 posted 05-30-2010 05:36 AM 2917 views 0 times favorited 3 replies Add to Favorites Watch
View Frankie59's profile

Frankie59

1 post in 2404 days


05-30-2010 05:36 AM

Hi everyone,
I just purchased a Millers Falls 2-A eggbeater hand drill. It is in excellent condition except for the chuck. I believe that the chuck is missing something as the jaw keeps on falling into the chuck. Does anyone know how to repair this? Is a picture of the inside of the chuck available?

Any help would be appreciated.

Thanks,

Franco


3 replies so far

View a1Jim's profile

a1Jim

115207 posts in 3045 days


#1 posted 05-30-2010 05:40 AM

Not something I’ve tried, they are pretty common in my area and on and on e bay.

-- http://artisticwoodstudio.com Custom furniture

View interpim's profile

interpim

1158 posts in 2926 days


#2 posted 05-30-2010 07:56 PM

sounds like your missing a spring

-- San Diego, CA

View Smitty_Cabinetshop's profile

Smitty_Cabinetshop

13738 posts in 2086 days


#3 posted 11-06-2012 04:47 AM

There are three jaws, three springs and a small, machined disc inside the chuck. With the chuck screwed down, onto the shaft, the jaws are pushed to the opening of the chuck and the bit is held. Not sure of the condition you’re describing. It’s been a very long time since your post… Did you solve the problem?

-- Don't anthropomorphize your handplanes. They hate it when you do that. -- OldTools Archive --

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com