LumberJocks

Automatic Vacuum Switch

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by slick1 posted 05-29-2010 02:58 AM 2306 views 0 times favorited 6 replies Add to Favorites Watch
View slick1's profile

slick1

15 posts in 1712 days


05-29-2010 02:58 AM

Topic tags/keywords: question

Anyone know of an Automatic Vacuum Switch made for a Delta 50-760 Dust Collector? I have tried iVac switch from Lee Valley Tools, but the 50-760 motor draws too much power and trips the breaker.

Delta 50-760: 1-1/2 HP , 120/240V (wired for 120V) , 1 Phase, 60Hz

Any help very much appreciated !!!

-- - - - Rod , Lloydminster, Saskatchewan, Canada


6 replies so far

View barryvabeach's profile

barryvabeach

159 posts in 1790 days


#1 posted 05-29-2010 03:18 AM

I used a jet remote switch – not automatic – but it has a key fob type control and it works fine.

View slick1's profile

slick1

15 posts in 1712 days


#2 posted 05-29-2010 03:40 AM

It would be nice to have remote option available, but dust collector is outside in another room with 8” wall between. Tried remote option, but signal blocked by wall.

-- - - - Rod , Lloydminster, Saskatchewan, Canada

View Milo's profile

Milo

862 posts in 2065 days


#3 posted 05-29-2010 03:54 AM

Out of curiosity, any idea how much that jet remote switch costs?

-- Beer, Beer, Thank God for Beer. It's my way of keeping my mind fresh and clear...

View TopamaxSurvivor's profile

TopamaxSurvivor

15066 posts in 2422 days


#4 posted 05-29-2010 03:58 AM

You can always wire the small switch to a larger contactor or motor starter in the vacuum circuit.

-- "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View scturner's profile

scturner

3 posts in 1396 days


#5 posted 02-24-2011 04:29 PM

Sorry, I’m no help with the switch but….on another subject….how did you enlarge the chop saw hood for your slider from the one designed with the plenum that you were using as a reference model, but was built for a non-slider. And….how’s it working for you. I just purchased a Ryobi 10” slider and want to get a dust collector hood made for it before I get distracted.
Thanks

-- Chuck ---- one good turn deserves another

View Paul C.'s profile

Paul C.

154 posts in 1992 days


#6 posted 02-24-2011 09:57 PM

I hook mine into two separate circuits. It works fine then.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase