LumberJocks

Rockler gravity feed HVLP sprayer

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Ed Elizondo posted 05-19-2010 05:10 AM 1055 views 0 times favorited 1 reply Add to Favorites Watch
View Ed Elizondo's profile

Ed Elizondo

81 posts in 2267 days


05-19-2010 05:10 AM

Topic tags/keywords: hvlp staining spar finish spray guns spray gun finishing question oak

I need some help and feedback on the Rockler gravity feed HVLP GUN, #38269. I would like to use this to stain and use some spar poly to refinish three sets of french doors. Will this work using a 2hp pancake compressor with a 5.2 cfm at 40 psi output. And do I need to change out the tips for use on both uses, stain and spar. I haven’t call Rockler yet to get their take on this. Can anyone give me their views on whether this will work. The doors don’t have any large panels on them and really only have rails and stiles about 8 inches wide so I don’t think the compressor would be running all the time to keep up. Would I have to lay down anything prior to laying down the stain. Any feedback would be greatly appreciated. Thanks.

-- Ed E. " Taking one board at a time "


1 reply so far

View a1Jim's profile

a1Jim

112806 posts in 2321 days


#1 posted 05-19-2010 05:17 AM

I don’t have that gun Ed but any compressor that can’t keep up with sprayer can really make a good spray job very tough

-- http://artisticwoodstudio.com Custom furniture

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase