Modified my fence

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Woodchuck2010 posted 07-15-2016 08:10 PM 255 views 0 times favorited 2 replies Add to Favorites Watch
View Woodchuck2010's profile


465 posts in 278 days

07-15-2016 08:10 PM

Removed the Delrin face on one side of my stock fence and attached an extruded aluminum rail to it. Looks a little odd, but it’s dead flat. I was going to cut it a little shorter, but I tried it with a longer piece of plywood and it was so much easier keeping it flat against the fence. I’ll either have to add a auxiliary face or something under the fence to cut 1/4” or thinner material. The stock holes won’t let me lower the rail quite enough.

-- Chuck, Michigan,

2 replies so far

View toolie's profile


2009 posts in 2048 days

#1 posted 07-16-2016 01:50 PM

Nicely done. I may have to look into doing something similar on both of my saws. Where did you get the extrusion?

-- there's a solution to every just have to be willing to find it.

View Woodchuck2010's profile


465 posts in 278 days

#2 posted 07-16-2016 02:24 PM

I got it on Amazon.

I did have to drill and tap a new hole for the sight marker on my T-fence. I think I might still get the face machined though. I’m too picky I guess. hahaha

-- Chuck, Michigan,

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics