Sourcing Hardware in Bulk

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by George Coles posted 07-07-2016 02:44 AM 468 views 0 times favorited 7 replies Add to Favorites Watch
View George Coles's profile

George Coles

169 posts in 1864 days

07-07-2016 02:44 AM

Hi. This is my first post here, so hope I am in the right place.

I am an Australian living in the Philippines and buying quality furniture hardware in small or large quantities is nearly impossible.

I know where to buy in AUstralia, but shipping and customs from there is difficult. Mush easier from the USA. I often ship parcels from Los Angeles, CA 90061.

So my question to fellow LJs is where in LA can I purchase online, furniture hardware in bulk at reasonable prices and quality? Things like Keyhole Hangers, Brass Hinges, Drawer Locks etc.

Also wish to buy band saw blades router bits etc.

Any help will be greatly appreciated.


George Coles

-- George Coles,

7 replies so far

View DocSavage45's profile


7647 posts in 2261 days

#1 posted 07-07-2016 05:52 AM


Don’t see any helpful answers here. I’m thinking it’s because most LJ’s purchase from Woodcraft, and Other well know places like Highland Woodworking. Have you googled it?

Found this maybe you can work out something?

Good Luck

-- Cau Haus Designs, Thomas J. Tieffenbacher

View bandit571's profile


14055 posts in 2102 days

#2 posted 07-07-2016 06:28 AM

I’d look into names like…Granger…..or…McMaster-Carr..

-- A Planer? I'M the planer, this is what I use

View Redoak49's profile


1817 posts in 1407 days

#3 posted 07-07-2016 10:53 AM

I buy from woodworkers hardware.

I have bought larger amounts of hinges, drawer slides and drawer pulls. You might take a look.

View diverlloyd's profile


1249 posts in 1276 days

#4 posted 07-07-2016 02:18 PM

What do you mean by in bulk? Are you talking a couple hundred or couple thousand at a time? is a place to buy direct from the manufacturer.

View TheGreatJon's profile


293 posts in 652 days

#5 posted 07-07-2016 02:28 PM

I second McMaster-Carr. I’ve had great experiences with them. The only downside is that they don’t give you the price of shipping until after the order is completed and processed. They do this not to freak you out (although that can definitely happen) but because they charge exactly what the shipping company charges them and they update the order when the shipper gives them the bill based on size/weight of the total combined package.

-- This is not the signature line you are looking for.

View BinghamtonEd's profile


2263 posts in 1788 days

#6 posted 07-07-2016 02:50 PM

I’ve used McMaster Carr too. In regards to shipping, I’ve found them to be very responsive to questions. I needed some 1/4” aluminum bar stock, and asked them for shipping estimates for 2 3-foot long pieces, or 1 6-foot long piece, and I had my answer within an hour or two. It was reasonable, I think to ship the 2 3-foot pieces of 1/4”x3” stock, it was around 8-10 bucks (domestic, though).

-- - The mightiest oak in the forest is just a little nut that held its ground.

View George Coles's profile

George Coles

169 posts in 1864 days

#7 posted 07-08-2016 02:51 AM

Thanks for the help fellow LJs. It is appreciated.

-- George Coles,

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics