Grizzly Cutter Head

« back to Woodworking Trade & Swap forum

25 posts in 1300 days

1124 days ago

I have a stock Grizzly cutterhead for the GO452 joiner. It is not the helix design, this one has 3 blades. It is in near mint condition, as it was removed when the unit was new and replaced with a helix unit. There are no chips in the blades and it has been well preserved in a wooden box. I am looking to sell it, but have no idea what it’s worth. Any ideas?

-- Bob from Virginia

2 replies so far

richgreer home \| projects \| blog 4474 posts in 1246 days #1 posted 1124 days ago	As you know, the helix design is now in vogue. Therefore, the market for this cutterhead will be limited. I will suggest that what you are really selling is 3 blades. I would check the prices at grizzly to find out what new blades cost and charge something less than what new blades would cost – maybe 70%. -- Rich, Cedar Rapids, IA - I'm a woodworker. I don't create beauty, I reveal it.
lc39tech home \| projects \| blog 2 posts in 1189 days #2 posted 1123 days ago	Hello Bob, I am intersted in buying the stock cutter head. I have a price in mind but do not wish to discuss it in an open forum. EDIT: Nevermind, i just realized this is for a six inch jointer, mine is eight inch. (That sounds like an enzyte commercial) Thanks, Allen

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	8797
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	224
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	28
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	61
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	82
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	1536
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	3553
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	15803
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	2038
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	496
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	2845
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	810
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	903
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	766
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	2740
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	1547
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	6163

LumberJocks Pulse

Latest activity	New comments or replies since you last checked
Coffee Table	wiscoworker	21 seconds ago	by Fishinbo	sign in to get readership tracking
Stanley Flatbase Spokeshave	Nugs	2 minutes ago	by JustJoe	sign in to get readership tracking
Treasure Box series #1	Patricelejeune	3 minutes ago	by Dusty56	sign in to get readership tracking
Aeon Toys Train	ralbuck	3 minutes ago	by Fishinbo	sign in to get readership tracking
Frame Around a TV	Mark Smith	6 minutes ago		sign in to get readership tracking
How NOT to Sell Your Stuff	CharlieM1958	6 minutes ago	by RONFINCH	sign in to get readership tracking
My first cutting board, ash	Skiedra	7 minutes ago	by Fishinbo	sign in to get readership tracking
Pembroke table #1	Patricelejeune	8 minutes ago	by Sandra	sign in to get readership tracking
Jewelry Box	Nairi Safaryan	8 minutes ago	by CowanNavy	sign in to get readership tracking
Rockin' Shelf	dartzt	9 minutes ago	by Fishinbo	sign in to get readership tracking

Author

Latest activity

New comments or replies
since you last checked

Coffee Table

wiscoworker

21 seconds ago

by Fishinbo

to get readership tracking

Stanley Flatbase Spokeshave

Nugs

2 minutes ago

by JustJoe

to get readership tracking

Treasure Box series #1

Patricelejeune

3 minutes ago

by Dusty56

to get readership tracking

Aeon Toys Train

ralbuck

3 minutes ago

by Fishinbo

to get readership tracking

Frame Around a TV

Mark Smith

6 minutes ago

to get readership tracking

How NOT to Sell Your Stuff

CharlieM1958

6 minutes ago

by RONFINCH

to get readership tracking

My first cutting board, ash

Skiedra

7 minutes ago

by Fishinbo

to get readership tracking

Pembroke table #1

Patricelejeune

8 minutes ago

by Sandra

to get readership tracking

Jewelry Box

Nairi Safaryan

8 minutes ago

by CowanNavy

to get readership tracking

Rockin' Shelf

dartzt

9 minutes ago

by Fishinbo

to get readership tracking

Grizzly Cutter Head

2 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...