LumberJocks

Paralok saw fence

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Zap posted 04-22-2010 05:35 PM 1976 views 0 times favorited 3 replies Add to Favorites Watch
View Zap's profile

Zap

1 post in 2739 days


04-22-2010 05:35 PM

Just saw a couple of old postings with questions about Paralok saw fences.
I have all the original brochures, drawings and plans as well as a couple of new units. Yes that is never used fences for 27”-30” saws. Anyone interested??


3 replies so far

View MagicalMichael's profile

MagicalMichael

59 posts in 299 days


#1 posted 04-27-2017 01:44 PM

I have a paralox fence on my General 350, but I don’t have, and don’t think I have ever had the owners manual. I would like to adjust it so that the exit end has at least one mm of offset but can’t figure out how to do it. Can you help me?
Michael

-- michael

View MagicalMichael's profile

MagicalMichael

59 posts in 299 days


#2 posted 04-27-2017 02:27 PM

Michael again. As best I can tell I need to loosen the set screw that pinches the cable, but my cable appears to be frozen to the fence part. I have completely removed the fence but have been unable to move the guide piece at the front of the saw. I haven’t tried the rear because its wedged under the outfeed table which is bolted to the floor, and I suspect that if one is fused so is the other.

Michael

-- michael

View runswithscissors's profile

runswithscissors

2514 posts in 1808 days


#3 posted 04-29-2017 04:39 AM

Can you post photos of your Paralok(x) fences? I think I’ve seen them, but not sure.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com