Wooden Vintage airplanes

« back to Designing Woodworking Projects forum

12 posts in 988 days

06-14-2016 05:35 AM

Topic tags/keywords: models airplanes vintage aircraft toys oak popular maple southern yellow pine

I am trying to start making solid models of old aircraft, mainly WW11. Does anyone know of a site that I might be able to get some help with this. I have thought about buying the plastic models and using that as guide to go by, other than that I have nothing. I have on the internet but nothing to find. I see a lot of autos and trucks on Lumberjocks that have been built but no planes. I will be using hardwoods on this, mostly oak, popular and maple with some southern yellow pine. The pine is readily available in my neck of the woods. Any help will be appreciated.

-- Larry, Georgia

3 replies so far

Harry home \| projects \| blog 80 posts in 1329 days #1 posted 06-14-2016 05:53 AM	Here is a link to a thread from an RC forum. Have fun. -- Harry - Professional amateur
Planeman40 home \| projects \| blog 1257 posts in 2910 days #2 posted 06-14-2016 04:04 PM	Hello Larry, I’m a Georgia boy too. The best place to find plans for model airplanes is http://www.outerzone.co.uk/ There are about 7,000 model airplane plans on this website for a free download. Unfortunately, there are few plans just for solid modeling, however these plans will give you the outlines and cross sections you will need. I personally have an extensive model airplane plans collection with some solid model plans for airplanes, boats, and cars. If you e-mail me at rufus.carswell@yahoo.com I can put these solid model plans on a disk and mail them to you. Planeman -- Always remember: It is a mathematical certainty that half the people in this country are below average in intelligence!
lrushing home \| projects \| blog 12 posts in 988 days #3 posted 06-14-2016 04:49 PM	Thanks for the info. I will email about those plans -- Larry, Georgia

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12235
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2251
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	459
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	352
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1457
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	5172
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	6922
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	28879
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	232
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5590
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1466
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	6443
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1422
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2229
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1198
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4856
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2234
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9003

	Author	Latest activity	New comments or replies since you last checked
anioljanusz's Profile	anioljanusz	10-23-2018 08:08 AM	sign in to get readership tracking
topshaunenciso's Profile	topshaunenciso	10-23-2018 07:55 AM	sign in to get readership tracking
Wicked tricky	harum	10-23-2018 07:44 AM	sign in to get readership tracking
quangcaogoogle's Profile	quangcaogoogle	10-23-2018 07:44 AM	sign in to get readership tracking
Workshop in a 10'x20' garage. Need feedback!	MSquared	10-23-2018 07:34 AM	sign in to get readership tracking
Eccentric Goblet - OR - The One That Really Shoulda Broken	Mark Wilson	10-23-2018 07:19 AM	sign in to get readership tracking
Dragon Intarsia	Jim Brown	10-23-2018 07:17 AM	sign in to get readership tracking
IndoGriya's Profile	IndoGriya	10-23-2018 07:16 AM	sign in to get readership tracking
Splitter/riving knife for Craftsman 113	mikey78	10-23-2018 07:16 AM	sign in to get readership tracking
Escher's "Reptiles" in relief	Phil32	10-23-2018 07:07 AM	sign in to get readership tracking

Wooden Vintage airplanes

3 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...