LumberJocks

Palo Verde bowl

  • Advertise with us

« back to Woodturning forum

Forum topic by jeff posted 06-06-2016 08:54 AM 357 views 0 times favorited 4 replies Add to Favorites Watch
View jeff's profile

jeff

988 posts in 2925 days


06-06-2016 08:54 AM

Topic tags/keywords: turning

Jerry aka Nubsnstubs was doing a demo at our local Woodcraft a few months ago.He was kind enough to give me this chunk of palo verde and this is how it turned out.

Measures 2 1/4” depth x 6 3/4” width.It was pretty buggy as you can see.Finish is a wiped on boiled linseed oil.Jerry thx.again…

-- Jeff,Tucson,Az.


4 replies so far

View Ronald G Campbell 's profile

Ronald G Campbell

891 posts in 1464 days


#1 posted 06-06-2016 11:52 AM

Nice looking bowl

Ron

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

View Nubsnstubs's profile

Nubsnstubs

826 posts in 1190 days


#2 posted 06-06-2016 12:58 PM

Why shucks, Jeff, that’s a mighty fine looking bowl. It really is. I was wondering what happened to that piece of wood. You did a great job on it. How did you finish the bottom? I know for certain you couldn’t use a vacuum and you don’t have my Tail Stock Steady, so how’d you do it? ............. Jerry (in Tucson)

-- Jerry (in Tucson)

View jeff's profile

jeff

988 posts in 2925 days


#3 posted 06-06-2016 08:42 PM

Thx.Ron…Jerry,I used a worm screw mounted in my chuck to turn the outside shape,I then turned a recess tenon for the bottom and reversed it in my chuck to turn the inside.I tried to make my final cuts as smooth as possible because I had a feeling trying to sand the surface with all those holes would grab the sand paper and I was right.Took a little extra time to finish it up.I had to use compressed air to remove the dust out of the holes.I hadn’t turned Palo Verde before so thx.again.

-- Jeff,Tucson,Az.

View jhannington's profile

jhannington

17 posts in 182 days


#4 posted 06-06-2016 09:51 PM

Very nice work!

-- Currently turning lumber into sawdust at The Foundry, http://www.thefoundryvt.org

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com