Grizzly Dust Collector

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by jat posted 05-09-2016 11:00 AM 684 views 0 times favorited 4 replies Add to Favorites Watch
View jat's profile


75 posts in 2921 days

05-09-2016 11:00 AM

I’m looking at the Grizzly G0562ZP. It has 2320 cfm and 16.9 static pressure. The unit is 3hp.

Anybody have experience with this unit? I’m sure it’ll be a vast improvement over my Oneida 2.5 hp unit. That has never been very effective. It has a maximum cfm of 905 with flexible hose at 15 ft. and static pressure of only 4.4.

I’ve looked at some other units but this one seems like the best deal for what you’re getting.

4 replies so far

View Redoak49's profile


3534 posts in 2138 days

#1 posted 05-09-2016 01:02 PM

I looked it up and on sale at$709 and I would think a good buy. It probably will work fine in most shops.

Note: I do not believe their specs as typically they are an exaggeration with all dust collectors.

It might be useful to search this site as someone did review it.

View RogR's profile


111 posts in 1015 days

#2 posted 05-09-2016 01:28 PM

I have a 3HP Grizzly and it has been nothing but effective for me. The biggest failure; I recently had to replace the battery in the remote – 5 years later :)

View copcarcollector's profile


256 posts in 2267 days

#3 posted 05-09-2016 09:25 PM

I have the G0562ZP, have had it for a couple of years. I removed the three way adapter from the inlet and put a 7” bend from the unit about 1/2 way up an 8 foot wall, then reduced to 6” pipe from there. Unfortunately I have not had a lot of shop time or use on the machine, but when I have used it, it works great. I bought a remote for it, might have been through Grizzly, I can double check. The unit is powerful and so far no issues with my limited use—

View jat's profile


75 posts in 2921 days

#4 posted 05-10-2016 11:06 AM

Thanks for the comments. As I said, almost anything will be an improvement over the Oneida I have. I think the debate now is whether to go with the 2hp or the 3hp. I only use it one tool at a time so I don’t really need all 3 inlets.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics