LumberJocks

Auction: Wide Belt Sander

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by Joe Lyddon posted 04-25-2016 09:17 PM 1027 views 0 times favorited 14 replies Add to Favorites Watch
View Joe Lyddon's profile

Joe Lyddon

9432 posts in 3514 days


04-25-2016 09:17 PM

Topic tags/keywords: auction four auctions montana ontario canada tracy calif albuquerque nm cnc specialized machinery

Auction Events open for Bid Now! – 4 auctions

.

================================

All assets of Casework Tech in Albuquerque, NM must be sold!!!

.

TIMESAVERS “252-1 WIDE BELT SANDER (1-HEAD)

1-Head, 51” cap. – Combination head with 6” dia. contact roll & dual action finishing platen, 40 HP V-belt drive motor; 52” x 75” abrasive belt, “Posi-Track” electronic belt tracking and air tensioning of abrasive belt; Ruff-Tex conveyor belt, variable feed speed 15 – 45 FPM;

Complete with: Double infeed & outfeed spring loaded pinch rollers, 28” infeed conveyor extension, disc brakes for quick positive stopping of contact roll, load meter; centralized control panel with all push button and magnetic starters

================================

.

NOTE: There are Four Auctions being held in various places… Check it out… for one close to you!

.

1. Montana Lettering complete shop liquidation

.

2. Casework Tech in Albuquerque, NM must be sold!!!

.

3. Tracy Ca MachineryAuction - Includes 2010 Morbidelli Unix CNC Machining Center - Broken down and ready to ship!

.

4. SOLGATE SOLAR PV MANUFACTURING - ONTARIO CANADA - COMPLETE SOLAR PANEL MANUFACTURING LINE

.

.

Sometimes stuff goes for just Pennies on the Dollar…

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"


14 replies so far

View robscastle's profile

robscastle

3392 posts in 1666 days


#1 posted 04-25-2016 09:52 PM

hey thats one big mother of a sander there Joe !
And to add insult ot injury they are all going for peanuts!

-- Regards Robert

View patron's profile

patron

13535 posts in 2803 days


#2 posted 04-25-2016 09:57 PM

need to borrow some money joe
couple grand to get the sander
couple more to haul it
couple more to bring in 3 phase

i’ll get back with you
about payments

you know you can trust me
you read it here on the net

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Joe Lyddon's profile

Joe Lyddon

9432 posts in 3514 days


#3 posted 04-25-2016 10:22 PM

OK David,

Yes, I know I can trust you… Just let me know what the total ends up to be… Don’t forget the Special Buyer/Seller % that is added to the final bid!

We’ll workout the interest rate, and payback details later…

No rush…

I get emails from the Auction place about the auctions… sometimes they have some darn good stuff at very reasonable prices that are somewhat CLOSE to me…

I find it interesting to see what Commercial / Industry equipment even exists! Boggles the mind at times.

I just KNEW you would be interested in that Sander… You were the first person I thought of when I saw it!

Later…

Let me know… now… don’t forget it… How far is away from you?

:) LOL

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View patron's profile

patron

13535 posts in 2803 days


#4 posted 04-26-2016 01:48 AM

not really sure joe

far is over the horizon from here

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View robscastle's profile

robscastle

3392 posts in 1666 days


#5 posted 04-26-2016 07:10 AM

David and Joe,

I think you should factor in some more loot from your very generous friend Joe, and buy all the solar gear fit it to the roof of your new workshop and then run three phase it around the workshop and then another supply lead back to Joes place so he has some return on the investment.

If only I lived near you guys I would haul everything free of charge just to be able to see it all running!

Especially that sander!

Here in Aust I cannot even buy a moulder as neither Woodstock or W&H have agents here for their gear
So owning a W1812 or 206 is not going to happen for me.

-- Regards Robert

View Jim Jakosh's profile

Jim Jakosh

17145 posts in 2567 days


#6 posted 04-26-2016 03:05 PM

WOW could you imagine getting that for $500?? BUT, you need the space and power to run it which I have neither.

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View robscastle's profile

robscastle

3392 posts in 1666 days


#7 posted 04-26-2016 07:30 PM

I am with you Jim its a bargain for sure, and would love to have it but then reality kicks in unless you have a workshop like Dr Who’s Tardis and an unlimited supply of power its just a dream!

No doubt somebody out there will snap it up!

-- Regards Robert

View robscastle's profile

robscastle

3392 posts in 1666 days


#8 posted 04-26-2016 07:56 PM

And if you are still drooling the sander operating facts
at 240 VAC:.....standby,

the machine at start up would draw about 250 Amps
and run at about 62 Amps dependent on loading
and if the main motor failed you would need to hit Joe up for about $4k for another main motor!
I dont think I could even afford to buy a belt, let alone run it, though it would be fun watching the neighbours lights dim as it started!

-- Regards Robert

View Joe Lyddon's profile

Joe Lyddon

9432 posts in 3514 days


#9 posted 04-27-2016 11:47 PM

WOW!

What a Giant…

You just opened my eyes…

I guess they’d just turn it on & leave it on… would be cheaper than turning it ON/OFF for every little thing…

... it would probably be used for hundreds of pieces anyway…

NOT for me… for sure… Thanks for your comments…

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View distrbd's profile

distrbd

2227 posts in 1908 days


#10 posted 04-28-2016 01:54 AM

That monster of a sander is indeed a time saver ,eventhough I’m retired but having that machine in my shop would still save me some time and would help me get to my “to do” list:

-- Ken from Ontario, Canada

View Dan Krager's profile

Dan Krager

3256 posts in 1696 days


#11 posted 05-28-2016 03:35 PM

I have two wide belt sanders and there are days I’d just as soon put a crank on them.

DanK

-- Dan Krager, Olney IL http://www.kragerwoodworking.weebly.com There are three types of people...those who are good at math and those who aren't.

View HerbC's profile

HerbC

1592 posts in 2321 days


#12 posted 05-28-2016 04:31 PM



I have two wide belt sanders and there are days I d just as soon put a crank on them.

DanK

- Dan Krager

And I’m sure if you put your crank on them we’d all hear ya complain! < BIG GRIN >

< Sorry, couldn’t resist… >

Herb

-- Herb, Florida - Here's why I close most messages with "Be Careful!" http://lumberjocks.com/HerbC/blog/17090

View Jimbo4's profile

Jimbo4

1432 posts in 2225 days


#13 posted 05-28-2016 05:00 PM

Good grief, that monster is bigger than my shop! :o)

-- BOVILEXIA: The urge to moo at cows from a moving vehicle.

View Nubsnstubs's profile

Nubsnstubs

826 posts in 1192 days


#14 posted 05-28-2016 07:54 PM

Pennies on the dollar ended with the Timesaver selling for 6500 bucks. I remember when new 37” were selling for 9 thousand. Bidding ended on the 20th. The other links posted, the machines sold for over 10,000…........ No bargains there. ........ Jerry (in Tucson)

-- Jerry (in Tucson)

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com