Carter Urethane Tire

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Sprague posted 03-19-2010 06:59 AM 1200 views 0 times favorited 3 replies Add to Favorites Watch
View Sprague's profile


8 posts in 3436 days

03-19-2010 06:59 AM

Topic tags/keywords: bandsaw tire

So i put this tire on my Delta 14” bandsaw. It is WAY smaller than the stock one. Notice the gaps on both sides of the tire and how it doesn’t even come close to filling the channel.

I looked on their website and this tire is the only one they make for a 14” bandsaw. This doesn’t seem right, as you can push the tire left and right in the channel. Anyone have experience with them?

Left and Right Gap:
Left and Right Gap

Doesn’t Fill The Channel:
Doesn't fill the channel

3 replies so far

View Michael Murphy's profile

Michael Murphy

453 posts in 3182 days

#1 posted 03-19-2010 04:09 PM

Probably won’t matter as the blade should stay in the center. The wheel is taller in the center than on the outsides so you can adjust the blade tracking by tilting the wheel. The flat side of the blade should be riding in the center of the wheel.

Is the tire a uniform thickness across the width?

-- Michael Murphy, Woodland, CA.

View dbhost's profile


5767 posts in 3409 days

#2 posted 03-19-2010 04:23 PM

The Delta Bandsaws I have seen at Lowes with the OE tires, other than the tire is black, have that same gap. My HF has that same gap. I think it is supposed to be there that way. I could be wrong, but that is how I have always seen them.

-- Please like and subscribe to my YouTube Channel

View Sprague's profile


8 posts in 3436 days

#3 posted 03-22-2010 06:58 AM

Thanks for the replies. I went out and got a set of stock tires for it. I just like how they fit better. I got them on the other day and ran some walnut logs through it tonight (rough turning blocks) and they work great.

Stock tire mounted in:
Stock Tire

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics