LumberJocks

Poll: wax on cross cut sled runners, table saw slots, or both?

  • Advertise with us

« back to Focus on the Workspace forum

Forum topic by jimmy J posted 03-30-2016 02:42 PM 564 views 0 times favorited 6 replies Add to Favorites Watch
View jimmy J's profile

jimmy J

229 posts in 2097 days


03-30-2016 02:42 PM

Where do you put you wax?


6 replies so far

View Dark_Lightning's profile

Dark_Lightning

2771 posts in 2827 days


#1 posted 03-30-2016 02:49 PM

Both, before I made a sled with HDPE runners.

-- Random Orbital Nailer

View BinghamtonEd's profile

BinghamtonEd

2281 posts in 2087 days


#2 posted 03-30-2016 03:10 PM

I do both. After a project, its part of the “wax all the tools” routine.

-- - The mightiest oak in the forest is just a little nut that held its ground.

View MrUnix's profile

MrUnix

5582 posts in 1917 days


#3 posted 03-30-2016 03:12 PM

Wherever I can get it… and even some places I can’t.

-- Brad in FL - In Dog I trust... everything else is questionable

View HokieKen's profile

HokieKen

3604 posts in 856 days


#4 posted 03-30-2016 03:37 PM

Table top, miter slots, sled runners and bottom of sled.

-- Kenny, SW VA, Go Hokies!!!

View MadMark's profile

MadMark

979 posts in 1171 days


#5 posted 03-30-2016 04:58 PM

Everywhere wood or steel needs needs to slide. Cast iron will almost drink wax. My brand is Johnson’s Paste Floor Wax but YMMV.

Glop it on,
Rub it in,
Let it dry,
Buff.

Repeat as required.

M

-- Madmark - Madmark2150@yahoo.com Wiretreefarm.com

View OSU55's profile

OSU55

1319 posts in 1707 days


#6 posted 03-30-2016 07:25 PM

Runners, sled bottoms, miter slots, machine tops, wherever wood slides

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com