Curved plywood

  • Advertise with us

« back to Wood & Lumber forum

Forum topic by woodworkingdrew posted 03-29-2016 01:08 AM 322 views 0 times favorited 2 replies Add to Favorites Watch
View woodworkingdrew's profile


189 posts in 1027 days

03-29-2016 01:08 AM

My buddy and I assembled this cabinet and noticed that the plywood was bowed. Wondering if anyone else has run into this and what the fix would be if any. Thanks

-- Andrew, California

2 replies so far

View 01ntrain's profile


135 posts in 489 days

#1 posted 03-29-2016 01:21 AM

I would speculate that your vertical pieces are a tad to long or you measured correctly and your dadoes are not deep enough. But, it you’re putting cross pieces in, you really shouldn’t have an issue any longer. Just bend the vertical pieces plumb, measure the cross-pieces, cut, install and you should be OK.

View conifur's profile


955 posts in 570 days

#2 posted 03-29-2016 01:48 AM

Ditto that and if you rabbited the frame in back to put the back in should take care of it too. If putting on a face frame that will take care of that too.

-- Knowledge and experience equals Wisdom, Michael Frankowski

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics