Hippie part bins

  • Advertise with us

« back to Designing Woodworking Projects forum

Forum topic by MadMark posted 03-19-2016 02:03 AM 564 views 0 times favorited 1 reply Add to Favorites Watch
View MadMark's profile


965 posts in 871 days

03-19-2016 02:03 AM

Topic tags/keywords: humor tip oak tablesaw sander clamp joining sanding rustic bins storage parts

I built these when I first got the saw running last year. The bins are in 5 different interchangible sizes to maximize the different shapes that can be stored.

The bins & boxes are S4S dimensional oak (back before I got the planer).

The boxes can fold shut and optionally latch into a cube. Due to the finger pull design the parts can’t spill from one bin to the next when latched into a cube even if tumbled.

Most of the drawers have different finger holes and faces by design. Since the drawers are unique you can reorder them and still recognize the bins.

Each box half was made using a different joinery technique – the URHC box is unglued box joints – the test fit was so tight I couldn’t easily get it apart to glue it.



ps: the cup is filled with saw fuel …

-- Madmark -

1 reply so far

View Joe Lyddon's profile

Joe Lyddon

9325 posts in 3471 days

#1 posted 03-19-2016 03:19 AM

Looks like you had real FUN doing this project!

Doing whatever was needed… doing it when it WAS needed… :)


Thank you!

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: ... My Small Gallery:"

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics