LumberJocks

SALE 10" Inca Cabinetmakers TableSaw

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by quinnjos posted 03-18-2016 04:10 PM 1223 views 0 times favorited 4 replies Add to Favorites Watch
View quinnjos's profile

quinnjos

2 posts in 262 days


03-18-2016 04:10 PM

Topic tags/keywords: inca tablesaw inca 10 tablesaw tablesaw

INCA 10” Cabinetmakers table saw 341.018 Model 259. 20mm (.784 in.) arbor with Inca hardwood stand , motor (1.5 HP, 110 v/220v Continuous Capacity).
Motor wired for 110v. Accessories:
Table Extension Guide Rails: 39.5 in. length and extra extension Table
Mortising Apparatus Table with two Hold down Clamps
Device for Cutting Tenons
Hold down with wheel for ripping
Drum Sander, 1.75 dia.
Abrasive Disk, 6 in. dia.
Wooden Guide for Lock Joint Work
Mortise Drill Bits: 4 ea. : 6mm, 8mm,10mm, 12mm
Milling Drill Bits: 2 ea.: 9/32”, 3/8”
Wobble washers,13/16 arbor (4 ea.)
Saw Blades: 20mm (.784 in.) arbor (most blades are dull) Dado Cutter: 6mm (.236 inch) width 10” chrome nickel 3 ea. (100, 75, 36 teeth) 7” “ “ 1 ea. (200 teeth) 7.25“ -24 teeth Carbide teeth 7-7/8” Carbide teeth 10” 4 ea. 40 teeth Carbide teeth 10” one ea. 24 teeth (new, 5/8” arbor) Carbide teeth 10” sanding dish, .784 arbor
Table Inserts (2 ea.: 1”, 9/64” throat)

Only $500.00. Buyer makes arrangements for pickup and shipping. Sale of home workshop due to age (86). This extraordinary saw has served me well over the years, and has its war wounds. Needs to be disassembled, lineage cleaned, and reassembled (take-down diagram of individual parts included in manual): adjustments are difficult to turn; suspect packed sawdust (or I am weaker with age). Location; Independence, Oregon


4 replies so far

View shastaman's profile

shastaman

30 posts in 309 days


#1 posted 03-19-2016 03:31 AM

86 year old makes his first post here to sell ?

View AlaskaGuy's profile

AlaskaGuy

2406 posts in 1769 days


#2 posted 03-19-2016 06:09 AM



86 year old makes his first post here to sell ?

- shastaman

What’s you point??

-- Alaskan's for Global warming!

View Andre's profile

Andre

1016 posts in 1266 days


#3 posted 03-19-2016 06:10 AM

If I was a bit closer would take it in a minute!

-- Lifting one end of the plank.

View a1Jim's profile

a1Jim

115201 posts in 3037 days


#4 posted 03-19-2016 11:55 AM

Good luck with your sale sir.Your saw is priced very well.

-- http://artisticwoodstudio.com Custom furniture

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com