**I need a good screw**

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by Alexander posted 03-02-2010 05:38 AM 973 views 0 times favorited 4 replies Add to Favorites Watch
View Alexander's profile


193 posts in 3077 days

03-02-2010 05:38 AM

I have between 60 and 80 drawer slides to install. The boxes will be made of plywood and MDF and the cabinets are made of particle board. I plan on using 5/8” #6 philip head screws.
Is ther one screw that will work in both Particle board and MDF?
Where is a good place to get a good screw at a fair price?
I was going to install 5 screws on each side of the box slide and 5 screws on each cabinet slide for a total of 20 screw/ drawer or sliding shelf.

Thank for the help.

-- John at Sugarloft Mountain........Don't argue with an idiot; people watching may not be able to tell the difference.

4 replies so far

View lew's profile


12018 posts in 3721 days

#1 posted 03-02-2010 05:40 AM

These folks have quite a selection of slide hardware:

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View cstrang's profile


1832 posts in 3134 days

#2 posted 03-02-2010 05:50 AM

I would use a Robertson screw head… less chance of slipping and stripping the screw. Just my 2 cents.

-- A hammer dangling from a wall will bang and sound like work when the wind blows the right way.

View GaryK's profile


10262 posts in 3954 days

#3 posted 03-02-2010 05:53 AM


-- Gary - Never pass up the opportunity to make a mistake look like you planned it that way - Tyler, TX

View MedicKen's profile


1612 posts in 3428 days

#4 posted 03-02-2010 06:05 AM

I agree with GaryK. Good selection and the right screw for every application

-- My job is to give my kids things to discuss with their

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics