Kerrville Texas Furniture Maker Show

660 posts in 3784 days

11-26-2007 03:38 PM

Any of the Texas Jocks been to the show in Kerrvile? I was thinking strongly about going today but I’m glad I checked the hours on-line before leaving. Closed on Mondays.

Anybody entered? Worth a three hour drive?

-- Paul, Texas

2 replies so far

scott shangraw

home | projects | blog

513 posts in 3760 days

#1 posted 11-27-2007 01:47 AM

There is some VERY nice pieces there.I would suggest going.I tried to do the show but it is only open to TX residents.A lot of the guys I do the Mesquite shows with in TX do it and do very well at it.

-- Scott NM,http://www.shangrilawoodworks.com

Mark

home | projects | blog

316 posts in 3825 days

#2 posted 11-27-2007 07:14 PM

I agree with Scott. I just got back from the show. It was very good with some very nice pieces. I’m from Kerrville and only became aware of the show a few days ago. I would suggest you try to come down and see for your self. It closes on 12/2/07 so time is running out.

I know we have the show every year but I seem to only find out about it at the last minute. Maybe I should pay better attention from now on.

Mark

-- Mark

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	11659
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	1811
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	389
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	305
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1211
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	4435
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	6283
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	26455
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	166
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5039
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1313
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	5834
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1300
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2005
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1146
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4530
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2145
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	8540

	Author	Latest activity		New comments or replies since you last checked
LumberJocks Beer Swap	HokieKen	07-22-2017 06:41 PM	by HokieKen	sign in to get readership tracking
Stumpy Nubs Woodworking Journal- A truly unique online publication (part 3)	StumpyNubs	07-22-2017 06:40 PM	by bandit571	sign in to get readership tracking
JakeG's Profile	JakeG	07-22-2017 06:39 PM		sign in to get readership tracking
4 Corner Grain Matched Jatoba Jewelry Box and Some Useful Varnish Finishing Info	Jerry	07-22-2017 06:38 PM	by Jerry	sign in to get readership tracking
compare the ridgid 10" R4513 to the R4512	bshaff	07-22-2017 06:29 PM	by WhyMe	sign in to get readership tracking
gammelgaardwolf32's Profile	gammelgaardwolf32	07-22-2017 06:26 PM		sign in to get readership tracking
Soaking Plane Parts in an Aluminum Tray?	fivecodys	07-22-2017 06:25 PM	by ksSlim	sign in to get readership tracking
Outdoor log benches.	BryanFaz	07-22-2017 06:25 PM	by BryanFaz	sign in to get readership tracking
GrandPa Adirondack	Jerry Spencer	07-22-2017 06:22 PM	by Popsnsons	sign in to get readership tracking
Power Tools #6: Just inherited these	Jerry	07-22-2017 06:21 PM	by Jerry	sign in to get readership tracking

Kerrville Texas Furniture Maker Show

2 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...