LumberJocks

Screwdriver ferrule repair recomendation please

  • Advertise with us

« back to Hand Tools forum

Forum topic by Combo Prof posted 02-20-2016 07:50 PM 515 views 0 times favorited 3 replies Add to Favorites Watch
View Combo Prof's profile

Combo Prof

3202 posts in 1113 days


02-20-2016 07:50 PM

I have a nice Stanley type screwdriver that I like but the ferrule keeps falling off. What is the preferred method of making it stay in place?

-- Don K, (Houghton, Michigan)


3 replies so far

View MadMark's profile

MadMark

979 posts in 1288 days


#1 posted 02-20-2016 07:54 PM

Epoxy or replace the handle.

M

-- Madmark - Madmark2150@yahoo.com Wiretreefarm.com

View Brit's profile

Brit

7322 posts in 2678 days


#2 posted 02-20-2016 09:47 PM

Well if it isn’t too lose, you might try spraying the wood that goes into the ferrule with hair spray. That is the trick to keep LN handles in the sockets of their chisels. I can’t see why it wouldn’t work here also.

-- https://www.clickasnap.com/Andy61 - Andy - Old Chinese proverb says: "If you think something can't be done, don't interrupt man who is doing it."

View Combo Prof's profile

Combo Prof

3202 posts in 1113 days


#3 posted 02-20-2016 09:51 PM

I was going to lead with the three ideas I had: (1) Epoxy, (2) hair spray, (3) ping with a nail set; but I did not want to stack the deck. Thanks for the replies. I’ll first try hair spray if have any, and then epoxy. Should do, eh!

-- Don K, (Houghton, Michigan)

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com