Where can I find or who send me dimensions od Delta table saw?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by panoramix posted 02-17-2016 02:22 PM 2958 views 0 times favorited 8 replies Add to Favorites Watch
View panoramix's profile


6 posts in 948 days

02-17-2016 02:22 PM

Topic tags/keywords: delta tablesaw


I need to build homemade table saw, and I need dimensions of good and popular table saw like Delta. If someone be so kind and help me with dimensions? Im attach jpg file to show what dimensions I need.

Sorry if bad category.


8 replies so far

View ohtimberwolf's profile


855 posts in 2470 days

#1 posted 02-18-2016 01:56 AM

Good luck Michal, I have a delta but there are so many different ones out there that are probably better than mine ( 1988 contractors saw) so I hope you get what you need. larry

-- Just a barn cat, now gone to cat heaven.

View jbay's profile


2591 posts in 1017 days

#2 posted 02-18-2016 02:09 AM

I would help, but i’m afraid if i’m .001 off someone will gladly jump down my throat.

View knotscott's profile


8121 posts in 3494 days

#3 posted 02-18-2016 02:34 AM

It’s not really a universal “standard”, but most full size cast iron saws are 27” deep (a), the main table is 20” wide (d), B and J can vary but most are between 8” and 12”. Standard miter slots are 3/4” wide x 3/8” deep (k). There is no real standard for the size of the throat insert, but many of the full size Delta saws like the older Unisaws and older contractor saws are 13-3/8”L (j) x 3-3/4”W (e). Dimensions F and G vary by brand and model, but on an older Delta Unisaw and older contractor saw the distance between Delta‚Äôs slots is 9-15/16 in. (5-1/2” from the left slot to the face of the arbor flange on the left and 4-7/16” from the flange to the right slot) .


-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

View 01ntrain's profile


257 posts in 1189 days

#4 posted 02-18-2016 04:05 AM

I would help, but i m afraid if i m .001 off someone will gladly jump down my throat.

- jbay


I laugh at that kind of anal-retentiveness. But, sadly it’s all over this forum.

View TheFridge's profile (online now)


10104 posts in 1604 days

#5 posted 02-18-2016 04:11 AM

Has plans in metric

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View runswithscissors's profile


2820 posts in 2143 days

#6 posted 02-18-2016 05:57 AM

I was going to respond to this, but realized he would need metric dimensions. I have a dual measure tape somewhere, but couldn’t put my hands on it quickly enough.

-- I admit to being an adrenaline junky; fortunately, I'm very easily frightened

View SawdustTX's profile


290 posts in 2442 days

#7 posted 02-18-2016 07:01 AM

Delta Unisaw Platinum, dimensions in mm:
a 685
b 125 (+ 205 for the extension wing)
c 70
d 252
e 95
f 40
g 338
h 116
i 275
j 95 (+ 205 for the extension wing)
k 19w 10d

View panoramix's profile


6 posts in 948 days

#8 posted 02-18-2016 11:28 AM

Well guys, thank you all for your help, I think I was inspired by the dimensions SawdustTX and knotscott and it’s enough for me.
mm or inch it does not matter. Thanks a lot

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics