LumberJocks

Turning setup for sale

  • Advertise with us

« back to Woodworking Trade & Swap forum

Forum topic by jleiwig posted 02-11-2010 04:24 PM 1222 views 0 times favorited 4 replies Add to Favorites Watch
View jleiwig's profile

jleiwig

47 posts in 3234 days


02-11-2010 04:24 PM

I have a PSI Turncrafter Pro Variable Speed 10×18 wood lathe for sale. I bought it in December. It comes with the following accessories:

2 8” Canton flannel buffs
1 large bar of plastic polish (fine dry grade)
1 large bar of plastic glo polish (ultra fine dry grade)
1 6” grinder
1 10” disc sander
1/2” Steb center
Collet Chuck System
Transfer punch set
5/8” keyless drill chuck with MT2 arbor
3/8” keyless drill chuck no arbor
3 bearing precision ground live center
carbide tipped dead center
precision ground tool steel tool rest system with 3.25” and 6” top bar
3”x4” Micromesh sanding pads
Mini Turning tool set
Center Punch
Vargas Deburr Tool
RCBS chamfer tool
Penturners Drill bit set 7mm, 10mm, 11mm, 27/64”, 3/8”, and letter “O” bits, also 10.5mm , 12.5mm, 15/32, and 25/64 to fit majority of pen kits out there.
150 through 600 grit sandpaper
bottle stopper mandrel and drill bit
specially made bushings for Sierra, Baron, slimline, and cartridge casing pens from www.penturnersproducts.com
5 different plastic storage cases for storing pen kits and bushings
Precision blank cutting jig for CMS.
And a premium assortment of wood/plastic/ and metal pen blanks

Everything you need to start turning pens or anything else you like!. Over $1100 invested as my Christmas present less than 2 months ago. $700 cash or possible trades for a nice tablesaw, jointer, and planer to do some flatwork I need around the house. Let me know what you have I’m open to a lot of trades!

Photobucket

-- I intend to live forever, or die trying..........Justin, Ohio


4 replies so far

View a1Jim's profile

a1Jim

115202 posts in 3040 days


#1 posted 02-11-2010 05:47 PM

Looks like a good set up, but no room left in my shop.

-- http://artisticwoodstudio.com Custom furniture

View Padre's profile

Padre

930 posts in 2952 days


#2 posted 02-12-2010 03:41 AM

A fine set up. I wish I lived closer!!

-- Chip -----------http://www.penmanchip.com-----------------Micah 6:8

View jleiwig's profile

jleiwig

47 posts in 3234 days


#3 posted 02-12-2010 02:57 PM

It is all top quality stuff in my opinion. A lot of people knock the PSI lathe, but I also had a JET 1220 lathe, and the PSI is just as nice as the JET for a little more than half the price!

-- I intend to live forever, or die trying..........Justin, Ohio

View jleiwig's profile

jleiwig

47 posts in 3234 days


#4 posted 02-12-2010 05:20 PM

I will also sell the lathe seperately for $180

-- I intend to live forever, or die trying..........Justin, Ohio

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com