Anyone need a "small" jointer?

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by conifur posted 02-03-2016 03:09 PM 670 views 0 times favorited 13 replies Add to Favorites Watch
View conifur's profile


955 posts in 575 days

02-03-2016 03:09 PM

-- Knowledge and experience equals Wisdom, Michael Frankowski

13 replies so far

View SirIrb's profile


1239 posts in 654 days

#1 posted 02-03-2016 03:12 PM

looks like a beautiful Crescent. I ll take it. If I had the room….

-- Don't blame me, I voted for no one.

View mramseyISU's profile (online now)


406 posts in 968 days

#2 posted 02-03-2016 03:38 PM

Well somebody is cleaning out an old pattern shop from the looks of that.

-- Trust me I'm an engineer.

View ScottM's profile


334 posts in 1569 days

#3 posted 02-03-2016 04:07 PM

Why can’t sellers just take at least 10 minutes to try and make it look like something that someone just must come and buy? Sure the brand names help, but people are looking at the images….

View dhazelton's profile


2292 posts in 1720 days

#4 posted 02-03-2016 07:36 PM

If you want a 20 inch jointer the appearance f that one won’t turn you off.

View shampeon's profile


1705 posts in 1606 days

#5 posted 02-03-2016 07:51 PM

Yeah, exactly dhazelton. If you’re selling a bulldozer, there’s no point in getting it detailed.

-- ian | "You can't stop what's coming. It ain't all waiting on you. That's vanity."

View MrUnix's profile (online now)


4039 posts in 1622 days

#6 posted 02-03-2016 08:13 PM

L. Power and Co. Jointer made sometime around 1910-1920, and weighs in at about 1400 lbs or more! They do clean up nice, and with a 5HP motor, can easily be run on a VFD:


-- Brad in FL - To be old and wise, you must first be young and stupid

View AZWoody's profile


680 posts in 647 days

#7 posted 02-03-2016 08:21 PM

Wish I lived closer…

View JayT's profile


4682 posts in 1634 days

#8 posted 02-03-2016 08:43 PM

I think it’s probably too small for my needs. Not quite enough room to land a plane. :-)

Would be sweet if I had a big enough shop and time to do a decent restoration.

-- "Good judgement is the result of experience. A lot of experience is the result of poor judgement."

View bigblockyeti's profile


3582 posts in 1144 days

#9 posted 02-04-2016 01:12 AM

I bet that things weighs well over 1400lbs, my Cresent 12” weighs 1375lbs. without a motor.

View pintodeluxe's profile


4827 posts in 2236 days

#10 posted 02-04-2016 01:19 AM

I think I’ll hold out for a 24” model.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View conifur's profile


955 posts in 575 days

#11 posted 02-04-2016 01:43 AM

Ya that and the 36” BS I posted for sale a few days ago, the shop would be a tilting if on the same side!!! I will pass on it, the fence is a bit short.
Not too many 20 inch wide boards out there unless a glue up.

-- Knowledge and experience equals Wisdom, Michael Frankowski

View woodbutcherbynight's profile


2302 posts in 1832 days

#12 posted 02-04-2016 02:42 AM

The word small has a new meaning having seen that one! Nice but no room for that in the shop at this time. LOL

-- Live to tell the stories, they sound better that way.

View dhazelton's profile


2292 posts in 1720 days

#13 posted 02-04-2016 01:51 PM

How does the porkchop ALWAYS get separated from the machine?

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics