Veneer Supplier

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by unisaw2 posted 02-07-2010 02:10 AM 1512 views 1 time favorited 9 replies Add to Favorites Watch
View unisaw2's profile


209 posts in 3236 days

02-07-2010 02:10 AM

Topic tags/keywords: oak veneering resource

Fairly new to Lumberjocks, but what an awesome website.

I’m looking for a good veneer supplier, either online or in the Chicago area. I want to make flat veneer quarter sawn white oak panels for cabinet doors. I have plenty of white oak stock, but don’t want to use it for the door panels. Thinking of using veneer over MDF.

Any suggestions? Thanks JJ

-- JJ - Northern Illinois

9 replies so far

View a1Jim's profile


117328 posts in 3778 days

#1 posted 02-07-2010 02:17 AM

Here’s a guy that can help

-- wood crafting & woodworking classes

View Bill Davis's profile

Bill Davis

226 posts in 4125 days

#2 posted 02-07-2010 03:05 AM

I made some veneered panels for use on a toy box for my grandson Braedyn. I made my own veneering setup with help mostly from Joe mentioned above. I used curly maple over 1/4” mdf substrate and was very pleased with the results. It might help to find a local supplier of the veneer to use just so you can actually touch before you buy but Jow probably still supplies that as well.

View SPalm's profile


5325 posts in 4083 days

#3 posted 02-07-2010 03:07 AM

I have had good luck with these two guys on eBay. I would recommend them. They ship quick and are pretty inexpensive. Sometimes eBay links don’t work so well so here are their names too.

Name: lepkowski

Name: rjfritz123

I have found that these rarely get bid on, so the bid you make is probably the only one. You could contact either one of these guys and just see what they have to sell outright, if you want.

-- -- I'm no rocket surgeon

View Sawdust2's profile


1466 posts in 4289 days

#4 posted 02-07-2010 06:18 AM

sequential flitches, quantity discounts


-- No piece is cut too short. It was meant for a smaller project.

View bigike's profile


4055 posts in 3489 days

#5 posted 02-07-2010 06:38 AM

cut some on the bandsaw if u have one

-- Ike, Big Daddies Woodshop,

View Glen Peterson's profile

Glen Peterson

556 posts in 3257 days

#6 posted 02-07-2010 10:25 PM

Try Berkshire Veneer in Great Barrington , MA. They will send anything. I’ve rarely met folks that are so easy to work with. I paid them a visit a couple of year ago and it was well worth the half day trip from Connecticut. In fact next week a couple of woodworking buddies and I are going on a woodworking trip to the Berkshires and this place is on our list.

-- Glen

View unisaw2's profile


209 posts in 3236 days

#7 posted 02-07-2010 10:39 PM

Thanks all for the information. This may be a long term project. Just starting to work with this White Oak.

This picture is a cope&stick door with a raised panel. I really don’t like the look of the raised panel, plus it really eats up the material, so the thinking is to try a flat panel.

Guess I need to either make or buy some veneer, and learn how to use it!

-- JJ - Northern Illinois

View eastside's profile


97 posts in 3462 days

#8 posted 02-09-2010 02:40 AM

Check out “THEVENEERSTORE.COM” great prices and a lot of exotics. The picture that you see on the web site is what you get. I buy from them, great people and fast service.

-- Mike, Westport MA.

View unisaw2's profile


209 posts in 3236 days

#9 posted 02-09-2010 03:38 AM

Thanks all. I am still reading & learning from all the above links. I will order some veneer soon, then give an update.

-- JJ - Northern Illinois

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics