Need Dimensions for Dewalt 735 Planer

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by BrettSherm posted 02-01-2016 01:52 PM 2467 views 0 times favorited 8 replies Add to Favorites Watch
View BrettSherm's profile


4 posts in 659 days

02-01-2016 01:52 PM

Topic tags/keywords: dewalt 735 planer stand

I’m building a stand for my future Dewalt 735 Planer. I’d like to get working on the stand before I purchase the planer. Can anyone give me the dimensions? Width (Meaning the side that you run the wood through), Depth (the other dimension) and height from the bottom to the planing table. There will be adjustability built into the stand with the height to the outfeed tables, so I don’t have to get it dead even at first, just close.

Thanks in advance.

8 replies so far

View syenefarmer's profile


468 posts in 2892 days

#1 posted 02-01-2016 02:00 PM

Found this doing a Google search, hope it’s correct.

Width = 27”, height = 14”, depth = 23” (tables folded-up) The handle sticks-out about 4” (in the 27” dimension).

View sawdustjunkie's profile


361 posts in 1529 days

#2 posted 02-01-2016 06:22 PM

The folding table on the exhaust side will not fold up completely, because the port is in the way, so don’t make it to narrow.
Mine sits up on my bench, so I have room on both sides to pass stock through it.

-- Steve: Franklin, WI

View nerdbot's profile


97 posts in 1173 days

#3 posted 02-01-2016 06:42 PM

I took this off some quick measurements off of my DW735. Width is about 21.5”, not including the handle, depth (from front to back of built in table – not the folding in- and out-feed tables) is about 19.75”, and the height from the bottom to the top of the tables is about 2 5/8”.

View WhyMe's profile


893 posts in 1373 days

#4 posted 02-01-2016 08:28 PM

If it helps… the Dewalt stand is 24”W X 21”D X 29.25”H.

View BrettSherm's profile


4 posts in 659 days

#5 posted 02-01-2016 08:32 PM

Thanks nerdbot. That’s a great help. I’m planing to go without extension tables and instead building it into the stand.

View Milled's profile


43 posts in 1435 days

#6 posted 02-01-2016 09:55 PM

Brettsherm, I wouldn’t build the stand until I had the 735 in hand. If you’re building the infeed and outfeed tables the measurements will need to be exact…not “about”.

-- If it's doable, I'll do it...if it's been done, I've done it...if it's impossible, I'll try it.

View Jim Finn's profile

Jim Finn

2564 posts in 2734 days

#7 posted 02-02-2016 02:54 AM

I have adjusted the infeed and out-feed Panels to omit snipe on mine and it works well now. I also suggest you get the planer , get it adjusted, and then make the infeed and out-feed benches for it, as needed.

-- "You may have your PHD but I have my GED and my DD 214"

View WhyMe's profile


893 posts in 1373 days

#8 posted 02-02-2016 02:37 PM

2.66 inches from top of planer table to bottom of base. That’s using a caliper on my 735.

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics