Ryobi P320 18ga cordless brad nailer jamming

« back to Power Tools, Hardware and Accessories forum

cootcraig

home | projects | blog

58 posts in 1445 days

01-31-2016 10:49 AM

Topic tags/keywords: cordless nailer

I have a Ryobi P320 18ga cordless brad nailer in hand I purchased from this site.

Reconditioned kit

The striker stuck in the out position on every brad of either 1 1/4 or 2”. The nail channel appeared dirty, so I swabbed it with alcohol using a cotton ball. After the alcohol swab the nail striker is sticking occasionally, but I was able to use it. I’m wondering if a good cleaning and application of a graphite lubricant might help. Any thoughts?

5 replies so far

bkseitz home \| projects \| blog 295 posts in 1543 days #1 posted 01-31-2016 05:31 PM	The original nailer had a thin coating of lube on it (like a thin grease), so I would imagine something like lithium grease might help -- bkseitz, Washington "if everything is going well, you've obviously overlooked something"
waho6o9 home \| projects \| blog 8539 posts in 2810 days #2 posted 01-31-2016 06:50 PM	Check out the Paslode cleaning kit at the big box store and oil things up after ‘ you clean it and it should perform better.
cootcraig home \| projects \| blog 58 posts in 1445 days #3 posted 01-31-2016 07:47 PM	Check out the Paslode cleaning kit at the big box store and oil things up after you clean it and it should perform better. - waho6o9 This? I did not see a kit. Cordless Tool Cleaner
cootcraig home \| projects \| blog 58 posts in 1445 days #4 posted 01-31-2016 07:49 PM	Check out the Paslode cleaning kit at the big box store and oil things up after you clean it and it should perform better. - waho6o9 Also found this 4.5 oz. Cordless Tool Oil Lubrication
waho6o9 home \| projects \| blog 8539 posts in 2810 days #5 posted 01-31-2016 08:40 PM	Bingo on both counts https://youtu.be/g2DNLmP30FI http://www.itwconstructionparts.com/manuals/help-videos/cleaning-maintaining-paslode-cordless-finish-nailers.html

Have your say...

You must be signed in to reply.

Forum	Topics
Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...	12343
Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.	2326
Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...	472
Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...	361
Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.	1508
Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...	5298
Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...	7045
Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...	29353
CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.	243
Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...	5703
Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...	1491
Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...	6567
Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...	1450
Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...	2269
Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...	1207
Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...	4907
LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...	2248
Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...	9088

	Author	Latest activity	New comments or replies since you last checked
Off-topic content. Click to see the post.	chrisstef	01-16-2019 01:29 AM	sign in to get readership tracking
2019 Spring Surprise Project Swap	EarlS	01-16-2019 01:26 AM	sign in to get readership tracking
Marshall Wells vise	lumber_jerk	01-16-2019 01:24 AM	sign in to get readership tracking
Off-topic content. Click to see the post.	Rick Dennington	01-16-2019 01:23 AM	sign in to get readership tracking
Nutcracker	PaulDoug	01-16-2019 01:15 AM	sign in to get readership tracking
Arts and Crafts guest bathroom conversation	James E McIntyre	01-16-2019 01:12 AM	sign in to get readership tracking
Stumpy Nubs Woodworking Journal- A truly unique online publication (part 5)	StumpyNubs	01-16-2019 01:11 AM	sign in to get readership tracking
Sawstop help contractor vs pro series	justwingit	01-16-2019 01:10 AM	sign in to get readership tracking
Looking for a BIG old engine lathe	REO	01-16-2019 01:10 AM	sign in to get readership tracking
tuning up a used table saw for safety - Jet JTAS-10XL-1	piersonjc	01-16-2019 01:10 AM	sign in to get readership tracking

Ryobi P320 18ga cordless brad nailer jamming

5 replies so far

Have your say...

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Off-topic content. Click to see the post.

2019 Spring Surprise Project Swap

Marshall Wells vise

Off-topic content. Click to see the post.

Nutcracker

Arts and Crafts guest bathroom conversation

Stumpy Nubs Woodworking Journal- A truly unique online publication (part 5)

Sawstop help contractor vs pro series

Looking for a BIG old engine lathe

tuning up a used table saw for safety - Jet JTAS-10XL-1

Ryobi P320 18ga cordless brad nailer jamming

5 replies so far

Have your say...

Woodworking Skill Share Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...

LumberJocks Pulse

Woodworking Skill Share
Your woodworking skills are displayed for several lifetimes in each project. Have you had to compromise your project...

Woodturning
On the lathe, by the lathe: do you have questions? frustrations? tips? This forum is for all the woodturners out there.

Woodcarving
Relief, 3D, chip-carving, whittling; carving knives, chisels, pocket-knives, power tools. If you are a carver or want...

Scrollsawing
Intarsia, fretwork, intricate design cutting and more! This forum is for scrollsawers: share your tips, ask questions...

Joinery
Have a question? a tip/strategy to share? a challenge, perhaps? Share your "joinery" discussion here.

Finishing
The finish, whether paint, wax, stain, or something else, can make or break a project. What are your tips and questio...

Designing Woodworking Projects
Looking for information on designing your projects? Having difficulties reading project plans? Looking for help with ...

Power Tools, Hardware and Accessories
Are you unsure of which tools, or hardware, you need, or which brands to buy? Investing in tools and hardware can be ...

CNC Woodworking
Questions and answers about CNC machines, tooling, best practices, and projects.

Hand Tools
Wood, your hand tools, you and a little know-how. Share your questions, tips and strategies for the use and maintenan...

Jigs & Fixtures
Using a jig is like having a couple extra hands helping out. Show us your jigs, share your tips, strategies and, of c...

Wood & Lumber
Different wood requires different woodworking strategies - from cutting to finishing. Share your tips and challenges ...

Safety in the Woodworking Shop
Before you pick up those woodworking tools, take the time to ensure your safety in the shop! Eyes, ears, fingers, and...

Focus on the Workspace
Are you looking for or do you have tips to share regarding the workshop? Storage, equipment placement, efficiency, an...

Sweating for Bucks Through Woodworking
If you are selling your work, then you have entered a woodworking dimension with added complexity and stress. If you...

Woodworking Trade & Swap
All of us are holding onto treasure in our shops, that we either don't need, don't want, or could part with if presen...

LumberJocks.com Site Feedback
Connect with the Website Gurus and tell us what you are thinking, suggestions, problems, functionality issues, and so...

Coffee Lounge
Need a break from all the standing and wood dust? Chat with your Forum Friends about their projects, their life, thei...