Ni name saw blades.

  • Advertise with us

« back to Power Tools, Hardware and Accessories forum

Forum topic by 716 posted 01-31-2016 05:08 AM 639 views 0 times favorited 3 replies Add to Favorites Watch
View 716's profile


502 posts in 945 days

01-31-2016 05:08 AM

My Grizzly came with some no name general purpose 40 teeth blade. I’ve heard that many toss the blade and buy something of higher quality. I was going to do the same but when checking the saw I noticed that blade wobbles very little so I gave it a try. It returned literally mirror like surface on crosscuts. For the comparison it feels to the touch similar to sanded to 220 grit sandpaper. No teeth marks whatsoever. Rips are rougher though but still no need to process before gluing. What do I miss?

-- It's nice!

3 replies so far

View TheFridge's profile


9608 posts in 1514 days

#1 posted 01-31-2016 05:31 AM

If it works for you then the roll with it.

-- Shooting down the walls of heartache. Bang bang. I am. The warrior.

View Handtooler's profile


1579 posts in 2160 days

#2 posted 01-31-2016 08:43 AM

I have the same results with my Grizzly no name blade and am quite pleased, still after thousands of cuts of mixed materials in various depths. It sure serves my need quite well. I am also curious as to manufacturer.

-- Russell Pitner Hixson, TN 37343

View 716's profile


502 posts in 945 days

#3 posted 02-01-2016 08:10 PM

Here is an example. The end grain sawn surface is much better than the planed sides.

-- It's nice!

Have your say...

You must be signed in to reply.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics